Metrikler
Yayın
385
Açık Erişim
47
BM Sürdürülebilir Kalkınma Amaçları
Biyografi
1974 yılında Kahramanmaraş'ta doğan Dr. Nadir Ayrılmış ilk, orta ve lise öğrenimini İstanbul’da tamamlamıştır. İstanbul Üniversitesi Orman Fakültesi, Orman Endüstri Mühendisliği Bölümünden 1996 yılında mezun olmasını takiben İ.Ü. Fen Bilimleri Enstitüsü, Orman Endüstri Mühendisliği Anabilim Dalı, Odun Mekaniği ve Teknolojisi Programında Yüksek Lisans öğrenimine başlamıştır. Yüksek Lisansına devam ettiği programda 1998 yılında Araştırma Görevlisi olarak göreve başlamıştır. Yüksek Lisanını 2000 yılında tamamlayarak aynı Anabilim dalında 2001 yılında Doktora öğrenimine başlamış ve 2006 yılında Dr. unvanını almıştır. Odun Mekaniği ve Teknolojisi Anabilim Dalı’nda 2008 yılı Nisan ayında Yardımcı Doçent kadrosuna atanan Nadir Ayrılmış, yine aynı yıl Aralık ayında Doçent Dr. Unvanını almıştır. Dr. Nadir Ayrılmış, 2014 yılının Temmuz ayında Prof.Dr. kadrosuna atanmıştır. İstanbul Üniversitesi-Cerrahpaşa'nın ulusal ve uluslararası alanda bilime öncülük eden bir araştırma üniversitesi olarak başarısının artmasında çalışmalarına devam etmektedir.
"Ability may take you to the top, but it takes character to keep you there"
Eğitim Bilgileri
2001 - 2006
2001 - 2006Doktora
İstanbul Üniversitesi, Fen Bilimleri Enstitüsü, Orman Endüstriü Mühendisliği Anabilim Dalı/Odun Mekaniği Ve Teknolojisi Programı, Türkiye
1996 - 2000
1996 - 2000Yüksek Lisans
İstanbul Üniversitesi, Fen Bilimleri Enstitüsü, Orman Endüstriü Mühendisliği Anabilim Dalı/Odun Mekaniği Ve Teknolojisi Programı, Türkiye
1992 - 1996
1992 - 1996Lisans
İstanbul Üniversitesi, Orman Fakültesi, Türkiye
Yaptığı Tezler
2006
2006Doktora
Çeşitli kimyasalların bazı ahşap levha ürünlerinde yanma ve teknolojik özellikler üzerine etkisi.
İstanbul Üniversitesi, Fen Bilimleri Enstitüsü, Orman Endüstriü Mühendisliği Anabilim Dalı/Odun Mekaniği Ve Teknolojisi Programı
2000
2000Yüksek Lisans
MDF nin teknolojik özellikleri üzerine ağaç türünün etkisi
İstanbul Üniversitesi, Fen Bilimleri Enstitüsü, Orman Endüstriü Mühendisliği Anabilim Dalı/Odun Mekaniği Ve Teknolojisi Programı
Yabancı Diller
C1 İleri
C1 İleriİngilizce
Araştırma Alanları
Avesis Araştırma Alanları:
Orman Endüstri Mühendisliği, Odun Mekaniği ve Teknolojisi, Kompozitler
WoS Araştırma Alanları:
Mühendislik Bilişim ve Teknoloji (Eng), Malzeme Bilimi
Scopus Araştırma Alanları:
Genel Malzeme Bilimi
Akademik Faaliyetlere Dayalı Araştırma Alanları
Avesis Araştırma Alanları
WoS Araştırma Alanları
Scopus Araştırma Alanları
Akademik Ünvanlar / Görevler
2014 - Devam Ediyor
2014 - Devam EdiyorProf. Dr.
İstanbul Üniversitesi, Orman Fakültesi, Orman Endüstri Mühendisliği
Yönetimsel Görevler
2014 - 2015
2014 - 2015Bölüm Başkanı
İstanbul Üniversitesi, Ormancılık Meslek Yüksekokulu, Malzeme Ve Malzeme İşleme Teknolojileri
Verdiği Dersler
Yönetilen Tezler
2014
2014Yüksek Lisans
Yonga İstifi Bekleme Şartlarının Liflevhanın Fiziksel Ve Mekanik Özellikleri Üzerine Etkisi
AYRILMIŞ N.
E.Ergül(Öğrenci)
2013
2013Doktora
Çeşitli güçlendirici dolgularla üretilen ahşap plastik nanokompozitlerin karakterizasyonu
AYRILMIŞ N.
A.Kaymakci(Öğrenci)
2013
2013Yüksek Lisans
Avrupa Melezi (Larix decidua Mill.) Ağacının Farklı Gövde Yüksekliklerinin Yongalevhanın Kalite Özellikleri Üzerine
AYRILMIŞ N. (Eş Danışman)
S.Muhcu(Öğrenci)
Makaleler
Tümü (322)
SCI-E, SSCI, AHCI (287)
SCI-E, SSCI, AHCI, ESCI (295)
ESCI (8)
Scopus (296)
TRDizin (10)
Diğer Yayınlar (19)
2026
20261. Experimental investigation on damage-induced changes in modal parameters of cross-laminated timber panels
ALTUNIŞIK A. C., ÖZTÜRK H. T., SUNCA F., OKUR F. Y., Karahasan A. K., DEMİR A., et al.
European Journal of Wood and Wood Products , cilt.84, sa.5, 2026 (SCI-Expanded, Scopus)
2026
20262. Effect of blend composition and core topology on FFF printed ABS/HIPS polymer blend structures for lightweight structural applications
Vennelakanti S. H. K., Sangeetha A. A., Muthukumar C., Subramanian J., Parameswaranpillai J., Krishnasamy S., et al.
PROGRESS IN ADDITIVE MANUFACTURING , 2026 (ESCI, Scopus)
2026
20263. Advances and future strategies in eco‐friendly processing technologies of agro‐based waste lignocellulosic fibers: driving sustainable innovation
Singh N., Suyambulingam I., Saluja R., Rao H. J., Gahlot N., Divya D., et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY , cilt.23, ss.1-37, 2026 (SCI-Expanded, Scopus)
2026
20264. Comprehensive Review on Green Transformation of Organic Waste Into Bioenergy Using Microbial Enzymes: Advances, Challenges, and Future Strategies
Divakaran D., Suyambulingam I., Selvan A., AYRILMIŞ N., Christy P. M., Gomathi M., et al.
GLOBAL CHANGE BIOLOGY BIOENERGY , cilt.18, sa.9, 2026 (SCI-Expanded, Scopus)
2026
20265. Synergistic effects of blue nitrile, graphite, and marble dust on the performance of wood fiberreinforced polyester composites for highperformance snowboards
Samuel J. J. J., Jeyaguru S., Sulaiman S. S., Thiagamani S. M. K., Ayrılmış N.
E-POLYMERS , cilt.26, sa.1, ss.20260004, 2026 (SCI-Expanded, Scopus)
2026
20266. Bioconversion of walnut shell residue into microcrystalline cellulose as reinforcement in polymer composites: driving green innovation
Somasundaram R., Suyambulingam ., Divakaran D., Ayrılmış N., Edayadulla ., Senthamaraikannan P., et al.
RSC ADVANCES , cilt.16, ss.1-15, 2026 (SCI-Expanded, Scopus)
2026
20267. Effects of Heat Treatment, Zn3BO6Addition, and their Combination on the Mechanical Properties and Water Absorption Behavior of Beech Wood/Polypropylene Composites
Hosseinihashemi S. K., Arwinfar F., Ayrılmış N.
BIORESOURCES , cilt.21, sa.3, ss.8592-8616, 2026 (SCI-Expanded, Scopus)
2026
20268. Valorization of bay leaf essential oil as a bioplasticizer and antibacterial agent in polybutylene adipate-co terephthalate biofilms for food packaging applications
Ayrılmış N., Özdemir F., Kahraman M. V., Suyambulingam ., Palanisamy, ., Palaniappan .
BIORESOURCES , cilt.21, sa.3, ss.8430-8443, 2026 (SCI-Expanded, Scopus)
2026
20269. Optimizing formulation of raw materials, polymer type, filler size, and process temperature in wood polymer composites using deep learning-enhanced digital twin
Özbay G., Bozkurt Ö., Ayrılmış N.
INTERNATIONAL POLYMER PROCESSING , cilt.41, ss.1-10, 2026 (SCI-Expanded, Scopus)
2026
202610. Sustainable smart packaging: Mulberry bark-derived pectin films integrated with betalain indicators for real-time ammonia monitoring
Mohan S., Muthulakshmi ., Ayrılmış N.
Bioresource Technology Reports , cilt.34, sa.102858, ss.102858, 2026 (ESCI, Scopus)
2026
202611. Evaluation of mechanical, tribological, and physical properties of epoxy composites reinforced with Borassusflabellifer and glass fibers
Varunkumar T., Sureshkumar V. P., Ayrılmış N.
Zastita Materijala , cilt.67, ss.1-11, 2026 (Scopus)
2026
202612. Influence of Ambient Vibration and Monotonic Loading on FEM Updating of Cross-Laminated Timber (CLT) Panels Used in the Building Industry
Ayrılmış N., Altunışık A. C., Demir A., Okur F. Y.
BUILDINGS , cilt.16, sa.11, ss.2237, 2026 (Hakemli Dergi)
2026
202613. Transforming residues to resources: agricultural waste management for value added products, bioenergy, and sustainable economic growth
Mawthoh A. B. T., Seram D., Watt H. J., Ayrılmış N., Subramani T., Pandurangan N. K., et al.
ENVIRONMENT, DEVELOPMENT AND SUSTAINABILITY A MULTIDISCIPLINARY APPROACH TO THE THEORY AND PRACTICE OF SUSTAINABLE DEVELOPMENT , cilt.28, ss.1-37, 2026 (SCI-Expanded, Scopus)
2026
202614. Characterization of Bio-Based Phenolic Plasticizer Extracted From Rambutan Fruit Shell Waste: A Sustainable Alternative to Synthetic Plasticizers for Green Polymer Applications
Divakaran D., Suyambulingam I., Narayanaperumal S., Ayrilmiş N., Palaniappan M., Palanisamy S., et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS' SOCIETY , cilt.103, ss.1-15, 2026 (SCI-Expanded, Scopus)
2026
202615. Biosynthesis of zinc oxide and silver/zinc oxide nanocompositesusing Kalanchoe pinnata leaf extracts for antibacterial and anticancer applications
Shreema K., Mathammal ., Somasundaram ., Kalaiselvi ., Ayrilmiş N., Blessymol B.
DISCOVER NANO , cilt.21, ss.99, 2026 (SCI-Expanded, Scopus)
2026
202616. A Critical Review on Green Conversion Techniques of Biomass Waste to Value-Added Bioproducts: Advances, Challenges, and Future Technological Strategies
Narayanaperumal S., Suyambulingam ., Divakaran D., Senthamaraikannan P., Selvan A., Avudaiappan ., et al.
GCB BIOENERGY , cilt.18, sa.5, ss.70118, 2026 (SCI-Expanded, Scopus)
2026
202617. Development of Cost-Effective and Highly Transparent Melamine Formaldehyde Resin Modified With Sodium Chloride for Enhancing Glossiness and Abrasion Resistance of Melamine Impregnated Paper
Kamrani S., Pizzi N., Ahmadi P., Dorieh A., Sikora A., Hýsek Š., et al.
POLYMER ENGINEERING AND SCIENCE , cilt.66, ss.1-12, 2026 (SCI-Expanded, Scopus)
2026
202618. Improving mechanical, thermal, and wear properties of 3D-printed PLA polymer using activated carbon powder derived from wood pulp
Selwin M., AYRILMIŞ N., Ponsuriyaprakash S.
Emergent Materials , cilt.9, sa.4, 2026 (ESCI, Scopus)
2026
202619. Synergistic Effect of Co-Pyrolysis of Biomass and Disposable Face Mask Waste on Energy Efficiency: Experimental Modeling for Energetic Characteristics
Nallaselvam T., Kalaiarasu B., Rajamohan S., Ayrilmiş N., Marshal S. J. J.
GCB BIOENERGY , cilt.18, ss.70109, 2026 (SCI-Expanded, Scopus)
2026
202620. Structural characterization and optimummachining parameters of jute/carbon fibrehybrid reinforced epoxy composite laminates
Prabhu P., Arunkumar A., Ayrilmiş N., Suresh V., Subbiah R., Shankar E.
POLYMER INTERNATIONAL , cilt.75, ss.1-14, 2026 (SCI-Expanded, Scopus)
2026
202621. Prediction of elastic properties of 3D printed PLA/wood composites through multi-scale analytical modeling
Ezzaraa I., Ayrilmiş N., Abouelmajd M., Kuzman M. K., Bahlaoui A., Arroub I., et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.143, ss.1-19, 2026 (SCI-Expanded, Scopus)
2026
202622. Bibliometric analysis, current studies, and future perspective of biocharfilled polymer composite: a sustainable filler for enhancing physicalproperties
Louhichi B., Elfar A. A., Sahu S. K., Lee I. E., Chung G. C., Ayrilmiş N.
ADVANCES IN PHYSICS: X , cilt.11, sa.1, ss.2646244, 2026 (SCI-Expanded, Scopus)
2026
202623. Bioconversion and characterization ofwatermelon rind waste-based microcrystallinecellulose: A green alternative tosynthetic reinforcements
Suyambulingam I., Narayanaperumal S., Divakaran D., Ayrilmiş N., Senthamaraikannan P., Avudaiappan S., et al.
POLYMER INTERNATIONAL , cilt.75, ss.1-16, 2026 (SCI-Expanded, Scopus)
2026
202624. Biopolymer-based eco-friendly coatings reinforced with lignin nanoparticles for surface coating applications of engineered wood-based panels
Al G., Aydemir D., Ayrilmiş N., Küçük Y., Gülsoy S. K.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.20261, sa.349, ss.151008, 2026 (SCI-Expanded, Scopus)
2026
202625. Pomegranate-Mediated Sol–Gel Synthesis of TiO2/HAp Nanocomposites for Bone Cancer Treatment Applications
Yasotha P., Kalaiselvi V., Gopi S., Ayrilmis N.
CHEMISTRYSELECT , cilt.11, sa.5, ss.4149, 2026 (SCI-Expanded, Scopus)
2026
202626. Methods to optimize tribological properties of pineapple leaf fiber epoxy composites
Louhichi B., Joy ., Sahu S. K., Ayrilmiş N., Lee I. E., Ngu E. E., et al.
INDUSTRIAL CROPS AND PRODUCTS , cilt.242, ss.122865, 2026 (SCI-Expanded, Scopus)
2026
202627. Advances in sustainable conversion of hazardous sludge pyrolysis products into renewable energy
Rajamohan S., Nallaselvam T., Kalaiarasu ., Bisen D., Ayrılmış N., Marshal S. J. J.
FUEL , cilt.413, sa.1, ss.138012, 2026 (SCI-Expanded, Scopus)
2026
202628. Development and characterization of a bio-based lignosulfonate flame-retardant system for medium-density fiberboard: a comparative study with traditional formulations
Kamrani S., Mehdinia M., Movahed S. G., Shahavi M. H., Roodposhti A. H. R., Farajollah Pour M., et al.
Wood Material Science and Engineering , 2026 (SCI-Expanded, Scopus)
2026
202629. Enhancing heat-affected zone/hardness and decreasing crack length of Inconel 718 using coconut oil-based dielectric modified with CuO, TiO2, and SiC nanoparticles and optimized process parameters
Muthiah D. D., AYRILMIŞ N., Kumar D. R., Saravanan B., Krishnan K.
Revista Materia
, cilt.31, 2026 (SCI-Expanded, Scopus)
2026
202630. Comparative evaluation of treatment conditions on physical and mechanical properties of acetylated beech (Fagus orientalis Lipsky) wood
Hosseinihashemi S. K., Esfandiar ., Akhtari ., Ayrılmış N.
BIORESOURCES , cilt.21, sa.1, ss.1477-1496, 2026 (SCI-Expanded, Scopus)
2026
202631. Advances in electrospun nanofibrous yarns: improved functionality and emerging applications
Avvari V. D., Sreekanth ., Shahavi M. H., Olejnik R., Ayrılmış N., Shanmugam R.
MATERIALS CHEMISTRY AND PHYSICS , cilt.348, sa.15, ss.131621, 2026 (SCI-Expanded, Scopus)
2026
202632. Recent advances in microcrystalline cellulose-reinforced biopolymer films: extraction, properties, applications, and sustainability perspectives
Perumal S. N., Suyambulingam I., Divakaran D., Senthamaraikannan P., Selvan A., Avudaiappan S., et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.336, ss.149307, 2026 (SCI-Expanded, Scopus)
2026
202633. Use of pencil slat and graphite pencil shavings as reinforcing filler in thermoplastic composites
Ayrilmis N., Ozdemir F., Avsar E., Thiagamani S. M. K., Nagarajan R., Shahavi M. H., et al.
WOOD MATERIAL SCIENCE & ENGINEERING , cilt.21, sa.2, ss.1188-1198, 2026 (SCI-Expanded, Scopus)
2025
202534. Characterization and potential use of ionic liquid-blended vegetable oils as dielectric fluids in electrical discharge machining of Inconel 718 using copper electrode
Sambandhamoorthy S., Ayrılmış N., Durairaj R., Kannaian V., Krishnan K.
REVISTA MATERIA , cilt.30, ss.20250675, 2025 (SCI-Expanded, Scopus)
2025
202535. Synergistic effects of titanium dioxide and graphene nanofillers on delamination and thrust forces in machining glass fiber reinforced nanocomposites
Harsha M. S., Kumar V. S. H., Prasad M. B., Muthukumar C., Thiagamani S. M. K., AYRILMIŞ N., et al.
Scientific Reports
, cilt.15, sa.1, 2025 (SCI-Expanded, Scopus)
2025
202536. Silica Nanosphere-Coated Cellulose Nanocomposite for Copper and Zinc Adsorption From Wastewater: Isotherm Analysis
Shahavi M. H., Salmani H., Biglari ., Bright B. M., Binoj J. S., Ayrılmış N., et al.
CHEMISTRYSELECT , cilt.10, sa.47, ss.3687, 2025 (SCI-Expanded, Scopus)
2025
202537. Enhancement of antimicrobial and structural properties of PVA packaging films using neem leaf powder: an example for extending the shelf life of cowpeas
Solaikannan T., Paramasivan S., Nagarajan R., Ayrılmış N.
RSC ADVANCES , cilt.15, ss.42176-42191, 2025 (SCI-Expanded, Scopus)
2025
202538. Enhanced thermal, antimicrobial, water-resistance, and tensile properties of PVA packaging films reinforced with iron oxide nanofillers synthesized from spinach biomass extracts
Murali K., Raju N. N., Arunachalam K. P., Kumar P. S., Narayanaperumal S., Suyambulingam I., et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.39, ss.1-27, 2025 (SCI-Expanded, Scopus)
2025
202539. Biodegradable Hybrid Films From Cellulose Nanocrystalsand Chitosan Reinforced With Nano-MagnesiumOxide/Neem Oil for Enhancing Packaging Performance
Valsalan A., Paramasivan ., Nagarajan R., Ayrılmış N., Krishnan K., Mohammad F.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.142, ss.70002, 2025 (SCI-Expanded, Scopus)
2025
202540. Development of hybrid fiber-reinforced vinyl ester composites for civil and automotive applications
Vignesh V., Babu N. B. K., Mohan A. M., Kumar S. S., Nagaprasad N., Ayrılmış N., et al.
SCIENTIFIC REPORTS , cilt.15, ss.37174, 2025 (SCI-Expanded, Scopus)
2025
202541. Effect of Sea Water Degradation on Bending and Vibration Performance of Polyester Composites Reinforced with Woven Fabric of Jute/Aloe Vera Fibers
Senthilrajan S., Venkateshwaran N., Rajini N., Ayrılmış N., Krishnan K., Mohammad F.
Journal of Bio- and Tribo-Corrosion , cilt.11, ss.135, 2025 (Hakemli Dergi)
2025
202542. Isolation of microcrystalline cellulose from vegetable waste biomass and its potential as a high-performance green reinforcement in biocomposites
Suyambulingam I., Sundaram R. S., Divakaran ., Boominathan S., Kannan P. S., Ayrılmış N., et al.
Bioresource Technology Reports , cilt.32, ss.102337, 2025 (Hakemli Dergi)
2025
202543. Tragacanth gum as a green compatibilizer for natural fiber-polymer interfaces in hybrid composites
Prabhu P., Manohar G., Ayrılmış N., Suresh V., Shankar ., Balaji A., et al.
Bioresource Technology Reports , cilt.32, ss.102313, 2025 (SCI-Expanded)
2025
202544. Combined Effect of Graphene, Molybdenum Disulfide, and Hexagonal Boron Nitride Nanoparticles Modified Using Coconut Oil on Surface Integrity of Inconel 718
Arunprasad V., Ayrılmış N., Kumar D. R., Senthilrajan S.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS , cilt.35, ss.1-15, 2025 (SCI-Expanded, Scopus)
2025
202545. Synthesis and physicochemical characterization of copper oxide nanoparticles from phenolic-rich mustard seed extract for potential applications
Mohamed R. B., Arunachalam K. P., Ayrılmış N., Suyambulingam I., Narayanaperumal S.
WASTE AND BIOMASS VALORIZATION , cilt.16, ss.1-18, 2025 (SCI-Expanded, Scopus)
2025
202546. Mechanical Characterization of Epoxy Composites Reinforced with a Blend of Hibiscus rosa and Snake Grass Fibers Enhanced with Neem Gum Powder
Palaniappan M., Palanisamy S., Murugesan T., Ayrılmış N.
BIORESOURCES , cilt.20, sa.4, ss.10106-10129, 2025 (SCI-Expanded, Scopus)
2025
202547. Banana peel waste as a source of cellulosic filler: isolation, characterization, and its potential as a green reinforcement in polymer composites.
Suyambulingam I., Sivanantham G., Priyadharshini G. S., Divakaran D., Ayrılmış N., Senthamaraikannan ., et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT , cilt.27, ss.1-18, 2025 (SCI-Expanded, Scopus)
2025
202548. An experimental application of machine learning-driven neuro-fuzzy system to predict the wear behaviour of 3D printed bioplastics
Gopal P. M., Kavimani V., Murugesan K., Ayrılmış N.
JOURNAL OF POLYMER RESEARCH , cilt.32, ss.339, 2025 (SCI-Expanded, Scopus)
2025
202549. Utilizing waste manhole covers and fibreboard as reinforcing fillers for thermoplastic composites
Ayrilmis N., Kanat G., Yıldız Avşar E., Palanisamy S., Ashori A.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.44, sa.17-18, ss.1108-1118, 2025 (SCI-Expanded, Scopus)
2025
202550. 3D Bioprinting of Biomaterials: A Review of Advances in Techniques, Materials, and Applications
Kandasamy M., Vijayananth K., Parasuraman ., Ayrılmış N.
POLYMERS FOR ADVANCED TECHNOLOGIES , cilt.36, sa.9, ss.70324, 2025 (SCI-Expanded, Scopus)
2025
202551. Effect of Pyrolysis Derived Coconut Shell Biochar on the Mechanical, Thermal, Rheological, and Water Absorption Properties of PLA Composites
Sahu S. K., Sreekanth P. S. R., Kumar A. P., El‑Rayyes A., Ayrılmış N.
INTERNATIONAL JOURNAL OF THERMOPHYSICS , cilt.46, ss.164, 2025 (SCI-Expanded)
2025
202552. 3D-printed green biocomposites from poly(lactic acid) and pine wood-derived microcrystalline cellulose: Characterization and properties
Sekar S., Nagarajan R., Selvakumar P., Ayrılmış N., Krishnan K., Mohammad F., et al.
BIORESOURCES , cilt.50, sa.4, ss.8473-8492, 2025 (SCI-Expanded, Scopus)
2025
202553. Environmentally friendly composites from agricultural residue biomass for lightweight applications in new generation structures: A review
Palaniappan M., Palanisamy S., Louhichi B., Ayrılmış N., Murugesan T. M.
BIORESOURCES , cilt.20, sa.4, ss.1-38, 2025 (SCI-Expanded, Scopus)
2025
202554. Ethylcellulose microparticles as green encapsulation for slow release of microspherical abamectin pesticide for agricultural applications: Improvement of process parameters
Gorji N., Jahanshahi M., Shahavi M. H., Ayrılmış N.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.321, ss.146336, 2025 (SCI-Expanded, Scopus)
2025
202555. Eggshell Powder-Based Eco-Friendly Cellulose Nanofiber Aerogels With Excellent Thermal Insulation, Superior Flame Retardancy, and Exceptional Mechanical Durability
Poulose A., Mathew A., Maji P. K., Grohens Y., Pasquini D., George S. C., et al.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.142, ss.57885, 2025 (SCI-Expanded, Scopus)
2025
202556. Advancing Cardiac Tissue Engineering With Smart Biopolymers: From Fabrication Strategies to 4D Printing and Organoids
Radhakrishnan H. R. G., Chithamparam P., Thiagamani S. M. K., Muthukumaran A., AYRILMIŞ N.
Polymers for Advanced Technologies , cilt.36, sa.7, 2025 (SCI-Expanded, Scopus)
2025
202557. Synthesis and characterization of cellulose from Pachygone ovata leaf biomass as green reinforcement for biocomposites
Suyambulingam I., Perumal Sunesh N., Senthamaraikannan P., Divakaran D., Ayrılmış N., Murali A.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.320, ss.146206, 2025 (SCI-Expanded, Scopus)
2025
202558. Mechanical performance analysis of a 3D printing-based transtibial prosthetic socket against the gait cycle using the finite element method
Fitriyana D. F., Palanisamy S., Wicaksana Y. S., Anis S., Siregar J. P., Cionita T., et al.
RSC ADVANCES , cilt.15, ss.24150-24166, 2025 (SCI-Expanded, Scopus)
2025
202559. Extraction and characterization of cellulose from Anacardium occidentale shells: A sustainable approach to industrial waste management
Palaniappan M., Palanisamy S., Tadepalli S., Ayrılmış N., Murugesan T. M.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.320, ss.146120, 2025 (SCI-Expanded, Scopus)
2025
202560. Characterization of functional bio-plasticizer from Millettia pinnata leaf biomass as a green alternative to petroleum-based plasticizers
Ramesh K. R., Somasundaram R., Karthikumar S., Suyambulingam I., Ayrılmış N., Divakaran D., et al.
MACROMOLECULAR RESEARCH , cilt.33, ss.1-17, 2025 (SCI-Expanded, Scopus)
2025
202561. Combined effect of fluorocarbon resin impregnation and heat treatment: a dual approach for improving properties of paulownia wood
Talaei A., Rezvani M. H., Heidar H. R. C., Chotikhun A., Ayrılmış N.
WOOD MATERIAL SCIENCE AND ENGINEERING , cilt.20, ss.1-7, 2025 (SCI-Expanded, Scopus)
2025
202562. Improvement of the Thermal Behaviour of Epoxy/Fe Nanoparticle Composites by the Addition of Flame Retardants
Nazarenko O. B., Visakh P. M., Amelkovich Y. A., Ayrılmış N., Shahavi M. H., Nagarajan R.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS , cilt.35, ss.1-12, 2025 (SCI-Expanded, Scopus)
2025
202563. Properties and prototype applications of polyester composites reinforced with woven fabric of Agave vera-cruz fiber
Balaji A. N., Karthikeyan M. K. V., Vignesh V., Madhavan A. B., Ayrılmış N., Ryu K., et al.
JOURNAL OF WOOD SCIENCE , cilt.71, ss.1-11, 2025 (SCI-Expanded, Scopus)
2025
202564. Effects of Reinforcement by Both Waste Glass and Barley Straw on Water Resistance, Mechanical, and Thermal Properties of Polyethylene Composite
Ayrılmış N., Kuzmin, A. M., Masri ., Yagoub ., Sedira L., Pantyukhov ., et al.
BIORESOURCES , cilt.20, sa.3, ss.5967-5987, 2025 (SCI-Expanded, Scopus)
2025
202565. Improvement of vibration and acoustic properties of woven jute/polyester composites by surface modification of fibers with various chemicals
Senthilrajan S., Venkateshwaran ., Ismail S., Nagarajan R., Ayrılmış N., Krishnan K., et al.
SCIENTIFIC REPORTS , cilt.15, ss.19641, 2025 (SCI-Expanded, Scopus)
2025
202566. Real-Time Monitoring in Polymer Composites: Internet of Things Integration for Enhanced Performance and Sustainability — A Review
Karuppusamy M., Kalidas S., Palanisamy S., Ayrılmış N., Kanan M.
BIORESOURCES , cilt.20, sa.3, ss.1-26, 2025 (SCI-Expanded, Scopus)
2025
202567. A review of machine learning applications in polymer composites: advancements, challenges, and future prospects
Karuppusamy M., Thirumalaisamy R., Palanisamy S., Nagamalai S., Massoud E. E. S., Ayrilmiş N.
JOURNAL OF MATERIALS CHEMISTRY A , cilt.18, ss.1-19, 2025 (SCI-Expanded, Scopus)
2025
202568. Value-added utilization of agricultural wastes in biocomposite production: Characteristics and applications
Manickaraj K., Thirumalaisamy R., Palanisamy ., Ayrılmış N., Massoud E. E. S., Palaniappan M., et al.
ANNALS OF THE NEW YORK ACADEMY OF SCIENCES
, cilt.1548, sa.1, ss.1-20, 2025 (SCI-Expanded, Scopus)
2025
202569. Characterization of ePA/Carbon Fiber Composite Developed through Fused Deposition Modeling
Gopal P., Kavimani V., Arulmurugan R., Ayrilmiş N.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.34, ss.1-13, 2025 (SCI-Expanded, Scopus)
2025
202570. Experimental and Numerical Modeling of Bending Characteristics of Fir and Black Pine Wood from Different Forest Regions in Türkiye
KURUL F., GÖRGÜN H. V., Seker S., YILMAZ T., DÜNDAR T., AYRILMIŞ N.
FORESTS , cilt.16, sa.5, 2025 (SCI-Expanded, Scopus)
2025
202571. Annona squamosa seeds capped calcium oxide nano particles – anti-microbial, antioxidant, anti-ulcer analysis
Sarathamani ., Kalaiselvi ., Ayrilmiş N.
RSC ADVANCES , cilt.15, ss.4904-4914, 2025 (SCI-Expanded, Scopus)
2025
202572. Improving performance of composites: Natural and synthetic fibre hybridisation techniques in composite materials – A review
Ayrilmiş N., Mylsamy B., Aruchamy .
MATERIALS CHEMISTRY AND PHYSICS , cilt.334, sa.1, ss.130439, 2025 (SCI-Expanded, Scopus)
2025
202573. Properties of Plastic Composites Filled with Giant Reed Flour and Magnesium Oxide Nanoparticles
Ayrilmiş N., Yurttaş E., Avşar E.
BIORESOURCES , cilt.20, sa.2, ss.2670-2686, 2025 (SCI-Expanded, Scopus)
2025
202574. Optimization of wear behavior of additively manufactured green biocomposites from printed polylactic acid (PLA) and microcrystalline cellulose
Ayrilmiş N., Selwin M., Nagarajan R.
WOOD MATERIAL SCIENCE AND ENGINEERING , cilt.20, ss.1-10, 2025 (SCI-Expanded, Scopus)
2025
202575. Therapeutic and Environmental Potential of Mushrooms in Ancient and Modern Contexts: A Review
Seethapathy P., Subramani T., AYRILMIŞ N., Patil H.
International Journal of Medicinal Mushrooms , cilt.27, sa.4, ss.1-19, 2025 (SCI-Expanded, Scopus)
2025
202576. Investigation of Toxicity in Textile Materials from Natural and Synthetic-based Polymers Utilizing Bioassay Performances
Pekhtasheva E., Palanisamy S., Ayrılmış N.
BIORESOURCES , cilt.20, sa.1, ss.765-789, 2025 (SCI-Expanded, Scopus)
2025
202577. Machine Learning Approaches to Natural Fiber Composites: A Review of Methodologies and Applications
Palanisamy S., AYRILMIŞ N., Sureshkumar K., Santulli C., Khan T., Junaedi H., et al.
BioResources
, cilt.20, sa.1, ss.1-25, 2025 (SCI-Expanded, Scopus)
2025
202578. Effect of Accelerated Weathering on Color and Physico-mechanical Properties of Wood-plastic Composites with Nano Titanium Dioxide
Hosseinihashemi S. K., Rahimi A., Ayrılmış N.
BIORESOURCES , cilt.20, sa.1, ss.1200-1213, 2025 (SCI-Expanded, Scopus)
2024
202479. A Sustainable Nanoporous Adsorbent for Reducing Amoxicillin in Pharmaceutical Wastewater: Magnetic Tea Waste Hydrochar
Shahavi M. H., Akbari M., Ayrılmış N., Dorieh .
CHEMISTRYSELECT , cilt.9, sa.47, ss.202404915, 2024 (SCI-Expanded, Scopus)
2024
202480. Antibacterial performance of biodegradable polymer and hazelnut husk flour antibacterial biofilm with silver nanoparticles
Ayrılmış N., Yurttaş E., Tetik N., Özdemir F., Palanisamy S.
BIORESOURCES , cilt.19, sa.4, ss.8812-8826, 2024 (SCI-Expanded, Scopus)
2024
202481. Effect of interfacial bonding on the low velocity impact performance of jute fibre/epoxy polymer composites
Prabhakar M. M., Rajini N., Mayandi K., Ayrilmiş N., Abdullah M. M., Mohammad ., et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.135, ss.103833, 2024 (SCI-Expanded, Scopus)
2024
202482. Isolation of Microcrystalline Cellulose from Wood and Fabrication of Polylactic Acid (PLA) Based Green Biocomposites
Sekar S. M., Nagarajan R., Selvakumar P., Oluwarotimi I. S., Krishnan K., Mohammad F., et al.
JOURNAL OF RENEWABLE MATERIALS , cilt.12, ss.1-20, 2024 (SCI-Expanded, Scopus)
2024
202483. Advances in manufacturing of carbon-based molecular nanomaterials based on rice husk/hull waste
Govindarajan, R. P., Antony A., Palanisamy S., Ayrilmiş N., Khan ., Junaedi ., et al.
BIORESOURCES , cilt.19, sa.4, ss.1-19, 2024 (SCI-Expanded, Scopus)
2024
202484. Characterization of wood plastic composites made with recycled waste tire rubber
Shaneei B., Rezvani M. H., Ghofrani ., Chotikhun A., Ayrilmiş N.
MATERIALS RESEARCH EXPRESS , cilt.8, ss.1-16, 2024 (SCI-Expanded, Scopus)
2024
202485. Evaluation of mechanical properties and Fick's diffusion behaviour of aluminum-DMEM reinforced with hemp/bamboo/basalt woven fiber metal laminates (WFML) under different stacking sequences
Padmanabhan R., Rajesh S., Karthikeyan S., Palanisamy S., Ilyas R., AYRILMIŞ N., et al.
Ain Shams Engineering Journal , cilt.15, sa.7, 2024 (SCI-Expanded, Scopus)
2024
202486. Fostering sustainability: The environmental advantages of natural fiber composite materials – a mini review
Palanisamy S., Murugesan T. M., Palaniappan M., Santulli C., Ayrılmış N.
Environmental Research and Technology , cilt.7, sa.2, ss.256-269, 2024 (Scopus, TRDizin)
2024
202487. Two-step process for gossypol reduction and protein enhancement in cottonseed kernel powder
Satankar V., Jhodkar D., Singh M., Kumar M., Mageshwaran V., Palanisamy S., et al.
BIOMASS CONVERSION AND BIOREFINERY , cilt.14, ss.1-14, 2024 (SCI-Expanded, Scopus)
2024
202488. A review on natural fiber composites: Polymer matrices, fiber surface treatments, fabrication methods, properties, and applications
Mylsamy B., Shanmugam S. K. M., Aruchamy K., Palanisamy S., Nagarajan R., AYRILMIŞ N.
Polymer Engineering and Science , cilt.64, sa.6, ss.2345-2373, 2024 (SCI-Expanded, Scopus)
2024
202489. A Review on Surface Modification of Plant Fibers for Enhancing Properties of Biocomposites
Karthik A., Bhuvaneshwaran M., Kumar M. S. S., Palanisamy S., Palaniappan M., Ayrılmış N.
CHEMISTRYSELECT , cilt.9, sa.21, ss.202400650, 2024 (SCI-Expanded, Scopus)
2024
202490. An overview on recent approaches on drying of natural rubber materials
Mathew B. C., Marshal J. J. S., Palanisamy S., Ayrilmiş N.
MATERIALS RESEARCH EXPRESS , cilt.11, sa.6, ss.62005, 2024 (SCI-Expanded, Scopus)
2024
202491. Isolation and characterization of Banyan Tree Root Filler for Polymer Composites in Light-Weight Applications
Nalaeram S. R., Thiagamani S. M. K., Khan A., Ayrılmış N.
MATERIALS RESEARCH EXPRESS , cilt.11, sa.6, ss.65301, 2024 (SCI-Expanded, Scopus)
2024
202492. Extraction and characterization of fiber from the flower stalk of Sansevieria cylindrica
Palanisamy S., Rajan V. K., Mani A. K., Palaniappan M., Santulli C., Alavudeen A., et al.
Physiologia Plantarum , cilt.176, sa.2, 2024 (SCI-Expanded, Scopus)
2024
202493. Investigation of Properties and Product Development from the Industrial Fiber Crops (Musa acuminata) Biowaste
Ayrilmiş N., Dhesinghraja J.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY , cilt.18, sa.2, ss.240-251, 2024 (SCI-Expanded)
2024
202494. Selection and Processing of Natural Fibers and Nanocellulose for Biocomposite Applications: A Brief Review
Palanisamy S., Murugesan T. M., Palaniappan M., Santulli C., AYRILMIŞ N., Alavudeen A.
BioResources
, cilt.19, sa.1, 2024 (SCI-Expanded, Scopus)
2024
202495. Mechanical properties of epoxy composites reinforced with Areca catechu fibers containing silicon carbide
Ramasubbu ., Kayambu ., Palanisamy S., Ayrılmış N.
BIORESOURCES , cilt.19, sa.2, ss.2353-2370, 2024 (SCI-Expanded, Scopus)
2024
202496. Effect of Process Parameters and Material Selection on the Quality of 3D Printed Products by Fused Deposition Modeling (FDM): A Review
Palanisamy S., Karuppiah G., Kumar P., Dharmalingam S., Mubarak S., Santulli C., et al.
ADVANCES IN POLYMER TECHNOLOGY , cilt.2024, ss.480281, 2024 (SCI-Expanded, Scopus)
2023
202397. A study of the entrepreneurial opportunities, Indian and global economy in the 3D printing sector
Ramalingam P. S., Mayandi K., Rajini N., Kanna S. R., AYRILMIŞ N.
International Journal of Entrepreneurship and Small Business , cilt.51, sa.1, ss.39-61, 2023 (ESCI, Scopus)
2023
202398. Influence of Pre-Impregnation Acetic Anhydride and Heating Time on Mechanical and Physical Properties of Wood-Plastic Composites
Hosseinihashemi S., Ayrilmiş N.
DRVNA INDUSTRIJA , cilt.23, sa.4, ss.479-490, 2023 (SCI-Expanded, Scopus)
2023
202399. Use of hemp waste for the development of mycelium-grown matrix biocomposites: A concise bibliographic review
S P., T. M M., Ayrilmiş N.
BIORESOURCES , cilt.18, sa.4, ss.8771-8780, 2023 (SCI-Expanded, Scopus)
2023
2023100. Effect of Lignin Modification of Recycled and Fresh Wood Fibers on Physical, Mechanical, and Thermal Properties of Fiberboard
Gursoy S., Ayrılmış N.
FORESTS , cilt.14, sa.10, ss.2007, 2023 (SCI-Expanded, Scopus)
2023
2023101. Enhancing interfacial adhesion through coupling agent incorporation in plywood/ plastic waste composite materials
Ashori A., Ayrılmış N., Heydari V.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.127, ss.103513, 2023 (SCI-Expanded, Scopus)
2023
2023102. Mechanical and Thermal Properties of 3D-Printed Biocomposites of Polylactic Acid and Thermally Modified Wood Flour with Silver Nanoparticles
Yurttas E., Ayrilmiş N.
MACROMOLECULAR MATERIALS AND ENGINEERING , cilt.308, sa.12, ss.2300180, 2023 (SCI-Expanded, Scopus)
2023
2023103. Synthesis and characterization of green phenolic resin with olive oil mill wastewater
Ozbay G., Ayrilmis N., Ahmad M. S.
ENVIRONMENTAL SCIENCES EUROPE
, cilt.35, sa.1, 2023 (SCI-Expanded, Scopus)
2023
2023104. Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data
Ayrılmış N.
FORESTS , cilt.14, sa.1, ss.95, 2023 (SCI-Expanded, Scopus)
2023
2023105. Preparation and characterization of plywood panels using recycled HDPE as a formaldehyde-free adhesive: A comparative study
Ashori A., Heydari V., AYRILMIŞ N.
Journal of Wood Chemistry and Technology , cilt.43, sa.5, ss.298-307, 2023 (SCI-Expanded, Scopus)
2023
2023106. Effect of Content and Particle Size of Used Beverage Carton Pieces on the Properties of HDPE Composites
Kuzmın A., Özdemir F., Ayrılmış N., Kanat G.
BIORESOURCES , cilt.18, sa.2, ss.2815-2825, 2023 (SCI-Expanded, Scopus)
2022
2022107. Micromechanical models for predicting the mechanical properties of 3D-printed wood/PLA composite materials: A comparison with experimental data
Ezzaraa I., Ayrilmiş N., Kuzman M. K., Belhouidegd S., Bengourram J.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.29, sa.27, ss.6755-6767, 2022 (SCI-Expanded, Scopus)
2022
2022108. Phenol formaldehyde resin modified by cellulose and lignin nanomaterials: Review and recent progress
Ayrılmış N., Dorieh A.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.222, sa.1, ss.1888-1907, 2022 (SCI-Expanded, Scopus)
2022
2022109. Physical and Mechanical Properties of Thermoplastic Composites Filled with Wood Flour of Underutilized Chaste Tree
Ayrilmiş N., Yildiz E.
DRVNA INDUSTRIJA , cilt.73, ss.496-501, 2022 (SCI-Expanded, Scopus)
2022
2022110. Tribological Analysis of Jute/Coir Polyester Composites Filled with Eggshell Powder (ESP) or Nanoclay (NC) Using Grey Rational Method
Karuppiah G., Kuttalam K. C., AYRILMIŞ N., Nagarajan R., Devi M. P. I., Palanisamy S., et al.
FIBERS
, cilt.10, sa.7, 2022 (ESCI, Scopus)
2022
2022111. Antimicrobial properties of 3D printed biocomposites with heat-treated wood flour using silver nanoparticles with leaf extract
Yurttas E., Tetik N., Ayrılmış N.
WOOD MATERIAL SCIENCE & ENGINEERING , cilt.17, sa.2, ss.1-9, 2022 (SCI-Expanded, Scopus)
2022
2022112. Potential use of metalworking fluid as surface additive for improving surface properties, technological properties, and formaldehyde emission of fiberboard
Ayrılmış N., Gürsoy S.
CASE STUDIES IN CONSTRUCTION MATERIALS , cilt.16, sa.1, ss.952, 2022 (SCI-Expanded, Scopus)
2022
2022113. Development of Thermoplastic Composite Tube from HDPE/Barley Straw Fibers Using Extrusion Method
Kuzmin A., Ayrılmış N., Chalganov D. K.
Key Engineering Materials , cilt.910, ss.478-483, 2022 (Scopus)
2022
2022114. Long-Term Hygroscopic Thickness Swelling Rate of Hydrothermally Treated Beech Wood / Polypropylene Composites
Hosseinihashem S. K., Arwinfar F., Najafi ., Özdemir F., Ayrılmış N., Tamjidi A.
Drvna Industrija , cilt.73, sa.1, ss.59-68, 2022 (SCI-Expanded, Scopus)
2021
2021115. Synthesis and Characterization of PAN/TiO2 Based Carbon Nanofibers for Energy Application
Sontakke D., Kamble A. D., Shinde D. K., Ayrılmış N.
Journal of Xi'an University of Architecture & Technology , cilt.13, sa.7, ss.213-225, 2021 (Hakemli Dergi)
2021
2021116. A review on electrostatic powder coatings for the furniture industry
Ayrılmış N.
International Journal Of Adhesion And Adhesives
, cilt.113, sa.3, ss.103062, 2021 (SCI-Expanded, Scopus)
2021
2021117. Performance of Sisal/Hemp Bio‑based Epoxy Composites Under Accelerated Weathering
Kumar K. S. M., Ayrılmış N., Ungtrakul T., Chandrasekar M., Kumar T. S. M.
Journal Of Polymers And The Environment
, cilt.28, sa.12, ss.624-636, 2021 (SCI-Expanded, Scopus)
2021
2021118. Effect of novel scavengers based on phenolic compounds on formaldehyde emission and physical-mechanical properties of particleboard
Kord B., Movahedi F., Adlnasab L., Ayrılmış N.
WOOD MATERIAL SCIENCE & ENGINEERING , cilt.16, ss.1-11, 2021 (SCI-Expanded, Scopus)
2021
2021119. Investigation of abrasive water jet machining parameters on turkey fibre reinforced polyester composites
Manivannan J., Rajesh S., Mayandı K., Nagarajan R., Ayrılmış N.
MATERIALS TODAY PROCEEDINGS , cilt.45, sa.9, ss.8000-8005, 2021 (Hakemli Dergi)
2021
2021120. Assessment on hybrid jute/coir fibers reinforced polyester composite with hybrid fillers under different environmental conditions
Ganesan K., Kailasanathan C., Rajini N., Ismail S., Ayrılmış N., Mohammad F., et al.
Construction And Building Materials , cilt.301, ss.124117, 2021 (SCI-Expanded, Scopus)
2021
2021121. Effect of thermal modification on the surface quality of a coating applied to wood via the electrostatic spray deposition technique
Ayrılmış N., Akkuş M., Yılmaz S. N.
Bioresources , cilt.16, sa.4, ss.7355-7366, 2021 (SCI-Expanded, Scopus)
2021
2021122. Effects of sandwich core structure and infill rate on mechanical properties of 3D-printed wood/PLA composites
Ayrılmış N., Kariz M., Sernek M., Kuzman M. K.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.115, ss.3233-3242, 2021 (SCI-Expanded, Scopus)
2021
2021123. Selected properties of briquettes made from blends of bamboo and beech biomass
Lunguleasa A., Ayrilmiş N., Sova D., Spirchez C.
Turkish Journal Of Agriculture And Forestry , cilt.45, sa.4, ss.1-32, 2021 (SCI-Expanded, Scopus, TRDizin)
2021
2021124. Mechanical Properties of Barley Straw/HDPE Composites Produced with Extrusion Process
Kuzmin A. M., Ayrılmış N., Vodyakov V.
Defect and Diffusion Forum
, cilt.410, ss.593-598, 2021 (Scopus)
2021
2021125. Experimental Study for Flexural Rigidity and Cost Optimization of the Woven Fabric Glass/Carbon/Basalt and Hybrid Epoxy Composites
Uthale S. A., Shinde D. K., Ayrılmış N.
Journal of Xi'an University of Architecture & Technology , cilt.13, sa.7, ss.683-695, 2021 (Hakemli Dergi)
2021
2021126. Mechanical and thermal properties of biocomposite films produced from hazelnut husk and polylactic acid
Özdemir F., Ayrılmış N., Yurrtaş E.
WOOD MATERIAL SCIENCE & ENGINEERING , cilt.16, ss.1-7, 2021 (SCI-Expanded, Scopus)
2021
2021127. Effects of Selected Printing Parameters on the Fire Properties of 3D-Printed Neat Polylactic Acid (PLA) and Wood/PLA Composites
Knez N., Kariz M., Knez F., Ayrilmiş N., Kuzman M. K.
JOURNAL OF RENEWABLE MATERIALS , cilt.9, sa.11, ss.1883-1895, 2021 (SCI-Expanded, Scopus)
2021
2021128. Cellulosic fiber based hybrid composites: A comparative investigation into their structurally influencing mechanical properties
Vignesh V., Balaji A., Rabi B. R. M., Nagarajan R., Ayrılmış N.
Construction And Building Materials , cilt.271, ss.121587, 2021 (SCI-Expanded, Scopus)
2021
2021129. Preparation and characterization studies of modified cellulosic textile fabric composite with in situ-generated AgNPs coating
Sivaranjana P., Nagarajan E., Rajini N., Ayrilmis N., Rajulu A. V., Siengchin S.
Journal of Industrial Textiles , cilt.50, ss.1111-1126, 2021 (SCI-Expanded, Scopus)
2021
2021130. Compressive, dynamic and thermo-mechanical properties of cellulosic pineapple leaf fibre/polyester composites: Influence of alkali treatment on adhesion
Senthilkumar K., Saba N., Chandrasekar M., Jawaid M., Nagarajan R., Siengchin S., et al.
International Journal Of Adhesion And Adhesives , cilt.106, ss.102823, 2021 (SCI-Expanded, Scopus)
2021
2021131. Tribological Properties of Cyperus pangorei Fiber-Reinforced Polyester Composites (Friction and Wear Behavior of Cyperus pangorei Fiber/Polyester Composites)
Rajini N., Mayandi K., Prabhakar M. M., Siengchin S., AYRILMIŞ N., Bennet C., et al.
JOURNAL OF NATURAL FIBERS , cilt.18, sa.2, ss.261-273, 2021 (SCI-Expanded, Scopus)
2021
2021132. Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum
Ayrılmış N., Yurttaş E., Durmuş A., Özdemir F., Nagarajan R., Kalimuthu M., et al.
Journal Of Polymers And The Environment , cilt.29, sa.8, ss.2409-2420, 2021 (SCI-Expanded, Scopus)
2021
2021133. Development and Analysis of Completely Biodegradable Cellulose/Banana Peel Powder Composite Films
Senthil Muthu Kumar T., Rajini N., Alavudeen A., Siengchin S., Varada Rajulu A., Ayrilmis N.
JOURNAL OF NATURAL FIBERS , cilt.18, sa.1, ss.151-160, 2021 (SCI-Expanded, Scopus)
2021
2021134. Effect of Fiber Loading on Tensile and Hardness Behaviors of Turkey Feather Fiber Reinforced Polyester Composites
Manivannan J., Rajesh S., Mayandi K., Rajini N., Ayrilmiş N.
International Journalof Disaster Recovery and Business Continuity
, cilt.12, sa.1, ss.533-538, 2021 (ESCI)
2021
2021135. Potential application of fibrous sludge waste from paper mills in particleboard production
Akbulut T., Ayrılmış N., Avcı E.
FORESTIST
, cilt.71, sa.1, ss.54-61, 2021 (ESCI, TRDizin)
2020
2020136. Effects of the Face/Core Layer Ratio on the Mechanical Properties of 3D Printed Wood/Polylactic Acid (PLA) Green Biocomposite Panels with a Gyroid Core
Ayrılmış N., Nagarajan R., Kuzman M. K.
Polymers , cilt.12, sa.12, ss.2929, 2020 (SCI-Expanded, Scopus)
2020
2020137. An overview of endurance and ageing performance under various environmental conditions of Hybrid Polymer Composites
Kalımuthı M., Nagarajan R., Ayrılmış N., Devı M. I., Sıengchın S., Mohammad F., et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
, cilt.9, sa.6, ss.15962-15988, 2020 (SCI-Expanded, Scopus)
2020
2020138. Effects of various fire retardants on mechanical and fire properties of plywood
Ayrılmış N.
INTERNATIONAL SCIENTIFIC JOURNAL "MACHINES. TECHNOLOGIES. MATERIALS
, cilt.14, sa.7, ss.292-295, 2020 (Hakemli Dergi)
2020
2020139. Determination of Bending Moment of L-Type Corner Joints Used in Chair Production and Their Effects on Mechanical Performance of Chairs
Ayrılmış N., As N., Dündar T., Şendağ A.
Materials International
, cilt.2, sa.3, ss.318-323, 2020 (Hakemli Dergi)
2020
2020140. Free Vibrations and Flexural Strength Analysis of 3D Architected Core Sandwich Polymer
Ayrılmış N.
International Journal of Control and Automation
, cilt.13, sa.4, ss.1137-1151, 2020 (Scopus)
2020
2020141. Effects of various fire retardants on mechanical and fire properties of plywood
Ayrılmış N.
INTERNATIONAL SCIENTIFIC JOURNAL "MACHINES. TECHNOLOGIES. MATERIALS , cilt.14, sa.7, ss.292-295, 2020 (Hakemli Dergi)
2020
2020142. Effect of Boron and Phosphorus Compounds on Fire and Technological Properties of Oriented Strandboard
Ayrılmış N.
Materials International
, cilt.2, sa.2, ss.117-122, 2020 (Hakemli Dergi)
2020
2020143. Effect of fungal degradation on technological properties of carbon nanotubes reinforced polypropylene/rice straw composites
Kord B., Ayrılmış N., Ghalehno M. D.
Polymers & Polymer Composites , cilt.28, sa.0, ss.1-8, 2020 (SCI-Expanded, Scopus)
2020
2020144. Surface Properties of Oriented Strand Board Coated by Electrostatic Dry Powder Spray Deposition Technique
Ayrılmış N.
BIORESOURCES , cilt.15, ss.1521-1530, 2020 (SCI-Expanded, Scopus)
2020
2020145. Effect of Wood-drying Condensate on Emission of Volatile Organic Compounds and Bonding Properties of Fibreboard
Ayrılmış N., Kaptı T., Gürel A., Ohlmeyer M.
JOURNAL OF BIONIC ENGINEERING
, cilt.17, ss.206-214, 2020 (SCI-Expanded, Scopus)
2020
2020146. Synthesis of biobased phenolic resins using catalytic pyrolysis oil and its effect on oriented strand board performance
Özbay G., Kökten E. S., Ayrılmış N.
Journal Of Adhesion , cilt.96, sa.5, ss.475-489, 2020 (SCI-Expanded, Scopus)
2019
2019147. An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability
Prabhakar M. M., Rajini N., Ayrılmış N., Mayandi K., Siengchin S., Senthilkumar K., et al.
COMPOSITE STRUCTURES , cilt.230, 2019 (SCI-Expanded, Scopus)
2019
2019148. Surface Roughness and Wettability of Surface Densified Heat-Treated Norway Spruce (Picea abies L. Karst.)
AYRILMIŞ N., Kariz M., Kwon J. H., Kuzman M. K.
DRVNA INDUSTRIJA
, cilt.70, sa.4, ss.377-382, 2019 (SCI-Expanded, Scopus)
2019
2019149. Effect of 3d Print Layer Orientation on Tensile Properties of Poly(Lactic Acid) Polymer
Kalamuthi M., Nagarajan R., AYRILMIŞ N., Rajesh S.
International Journal of Engineering and Advanced Technology , cilt.9, ss.926-929, 2019 (Scopus)
2019
2019150. Increasing the Calorific Properties of Sawdust Waste from Pellets by Torrefaction
Lunguleasa A., AYRILMIŞ N., Spirchez C., Croitoru C.
BIORESOURCES , cilt.14, sa.4, ss.7821-7839, 2019 (SCI-Expanded, Scopus)
2019
2019151. A comprehensive review of electrospun nanofibers: Food and packaging perspective
Kumar T. S. M., Kumar K. S., Rajini N., Siengchin S., AYRILMIŞ N., Rajulu A. V.
COMPOSITES PART B-ENGINEERING , cilt.175, 2019 (SCI-Expanded, Scopus)
2019
2019152. Effect of selected printing settings on viscoelastic behaviour of 3D printed polymers with and without wood
Kuzman M. K., AYRILMIŞ N., Sernek M., Kariz M.
MATERIALS RESEARCH EXPRESS , cilt.6, sa.10, 2019 (SCI-Expanded, Scopus)
2019
2019153. Some advantages of three-layer medium-density fibreboard as compared to the traditional single-layer one
AKBULUT T., AYRILMIŞ N.
JOURNAL OF WOOD SCIENCE
, cilt.65, sa.1, 2019 (SCI-Expanded, Scopus)
2019
2019154. Preparation and characterization of polyhydroxybutyrate-co-valerate (PHBV) as green composites using nano reinforcements
Ashori A., Jonoobi M., AYRILMIŞ N., Shahreki A. A., Fashapoyeh M. A.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.136, ss.1119-1124, 2019 (SCI-Expanded, Scopus)
2019
2019155. Effect of wood flour content on surface properties of 3D printed materials produced from wood flour/PLA filament
Ayrılmış N., Kariz M., Kuzman M. K.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION , cilt.24, ss.659-666, 2019 (SCI-Expanded, Scopus)
2019
2019156. Effect of fibre loading and Ca(OH)(2) treatment on thermal, mechanical, and physical properties of pineapple leaf fibre/polyester reinforced composites
Krishnasamy S., Muthukumar C., Nagarajan R., Thiagamani S. M. K., Saba N., Jawaid M., et al.
MATERIALS RESEARCH EXPRESS , cilt.6, sa.8, 2019 (SCI-Expanded, Scopus)
2019
2019157. Improved mechanical and thermal properties of spent coffee bean particulate reinforced poly(propylene carbonate) composites
Kumar T. S. M., Rajini N., Huafeng T., Rajulu A. V., Ayrilmis N., Siengchin S.
Particulate Science and Technology , cilt.37, sa.5, ss.639-646, 2019 (SCI-Expanded, Scopus)
2019
2019158. Influence of Musa acuminate bio-filler on the thermal, mechanical and visco-elastic behavior of poly (propylene) carbonate biocomposites
Kumar T. S. M., Rajini N., Siengchin S., Rajulu A. V., AYRILMIŞ N.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION , cilt.24, sa.5, ss.439-446, 2019 (SCI-Expanded, Scopus)
2019
2019159. Impact response of basalt composite pipe using filament winding
Manojprabhakar M., Rajini N., Mayandi K., Subash K., Subramanian S., Vignesh S., et al.
JOURNAL OF PHYSICS: CONFERENCE SERIES , cilt.1240, sa.1, ss.12104, 2019 (Scopus)
2019
2019160. Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials
AYRILMIŞ N., Kariz M., Kwon J. H., Kuzman M. K.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.102, ss.2195-2200, 2019 (SCI-Expanded, Scopus)
2019
2019161. Biodegradable poly(propylene) carbonate using in-situ generated CuNPs coated Tamarindus indica filler for biomedical applications
Devi M. P. I., Nallamuthu N., Rajini N., Kumar T. S. M., Siengchin S., Rajulu A. V., et al.
MATERIALS TODAY COMMUNICATIONS , cilt.19, ss.106-113, 2019 (SCI-Expanded, Scopus)
2019
2019162. Influence of silver nanoparticles on the mechanical, thermal and antimicrobial properties of cellulose-based hybrid nanocomposites
Thiagamani S. M. K., Rajini N., Siengchin S., Rajulu A. V., Hariram N., AYRILMIŞ N.
COMPOSITES PART B-ENGINEERING , cilt.165, ss.516-525, 2019 (SCI-Expanded, Scopus)
2019
2019163. Effect of raw material composition of wood plastic composites on surface roughness parameters evaluated with a robust filtering method
Gurau L., AYRILMIŞ N.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.32, sa.4, ss.427-441, 2019 (SCI-Expanded, Scopus)
2019
2019164. Mechanical and thermal properties of spent coffee bean filler/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) biocomposites: Effect of recycling
Kumar S. M. T., Yorseng K., Rajini N., Siengchin S., AYRILMIŞ N., Rajulu V. A.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
, cilt.124, ss.187-195, 2019 (SCI-Expanded, Scopus)
2019
2019165. Mechanical and thermal properties of Moringa oleifera cellulose-based epoxy nanocomposites
Ayrilmis N., ÖZDEMİR F., Nazarenko O. B., Visakh P. M.
JOURNAL OF COMPOSITE MATERIALS , cilt.53, sa.5, ss.669-675, 2019 (SCI-Expanded, Scopus)
2019
2019166. Potential Use of Textile Dust in the Middle Layer of Three-layered Particleboards as an Eco-friendly Solution
NEMLİ G., ODABAŞ SERİN Z., ÖZDEMİR F., AYRILMIŞ N.
BIORESOURCES , cilt.14, sa.1, ss.120-127, 2019 (SCI-Expanded, Scopus)
2019
2019167. Surface characteristics of wood polypropylene nanocomposites reinforced with multi-walled carbon nanotubes
KAYMAKCI A., Birinci E., AYRILMIŞ N.
COMPOSITES PART B-ENGINEERING , cilt.157, ss.43-46, 2019 (SCI-Expanded, Scopus)
2019
2019168. EFFECT OF PARTICLEBOARD DENSITY AND CORE LAYER PARTICLE THICKNESS ON SURFACE ROUGHNESS
Gurau L., Benthien J. T., Ohlmeyer M., AYRILMIŞ N.
DREWNO , cilt.62, sa.204, ss.71-83, 2019 (SCI-Expanded, Scopus)
2019
2019169. Mechanical Property and Morphological Analysis of Polyester Composites Reinforced with Cyperus pangorei Fibers
Kalimuthu M., Nagarajan R., Batcha A. A., Siengchin S., Anumakonda V. R., AYRILMIŞ N.
JOURNAL OF BIONIC ENGINEERING , cilt.16, sa.1, ss.164-174, 2019 (SCI-Expanded, Scopus)
2018
2018170. EFFECT OF CORE LAYER COMPOSITION ON WATER RESISTANCE AND MECHANICAL PROPERTIES OF HYBRID PARTICLEBOARD
Kwon J. H., AYRILMIŞ N., Han T. H.
ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL
, cilt.17, sa.12, ss.2857-2864, 2018 (SCI-Expanded, Scopus)
2018
2018171. Effect of layer thickness on surface properties of 3D printed materials produced from wood flour/PLA filament
AYRILMIŞ N.
POLYMER TESTING , cilt.71, ss.163-166, 2018 (SCI-Expanded, Scopus)
2018
2018172. Reducing formaldehyde emission from wood-based panels by modification of UF and MUF resins with condensates obtained from kiln-drying of wood
Ayrilmis N., Kaptı T., Gürel A., Ohlmeyer M.
HOLZFORSCHUNG
, cilt.72, sa.9, ss.753-757, 2018 (SCI-Expanded, Scopus)
2018
2018173. All-cellulose composite films with cellulose matrix and Napier grass cellulose fibril fillers
Kumar T. S. M., Rajini N., Reddy K. O., Rajulu A. V., Siengchin S., Ayrilmis N.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , cilt.112, ss.1310-1315, 2018 (SCI-Expanded, Scopus)
2018
2018174. Development and material properties of reinforced plywood using carbon fiber and waste rubber powder
Ashori A., Ghofrani M., Rezvani M. H., Ayrilmis N.
POLYMER COMPOSITES
, cilt.39, ss.675-680, 2018 (SCI-Expanded, Scopus)
2018
2018175. Preparation and characterization of biopolymer nanocomposites from cellulose nanofibrils and nanoclays
Al G., Aydemir D., Kaygin B., Ayrilmis N., Gunduz G.
JOURNAL OF COMPOSITE MATERIALS , cilt.52, sa.5, ss.689-700, 2018 (SCI-Expanded, Scopus)
2018
2018176. Investigation of the Effects of Heat Treatment Applied to Beech Plywood
Lunguleasa A., AYRILMIŞ N., Spirchez C., ÖZDEMİR F.
DRVNA INDUSTRIJA
, cilt.69, sa.4, ss.349-355, 2018 (SCI-Expanded, Scopus)
2018
2018177. Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat-Treated Wood
ÖZÇİFÇİ A., KÖKTEN E. S., AYRILMIŞ N., ÖZBAY G., ALTUN S.
DRVNA INDUSTRIJA
, cilt.69, sa.3, ss.207-213, 2018 (SCI-Expanded, Scopus)
2018
2018178. Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer
AYRILMIŞ N., AKBULUT T.
DRVNA INDUSTRIJA
, cilt.69, sa.4, ss.379-385, 2018 (SCI-Expanded, Scopus)
2018
2018179. Bond performance of formaldehyde-based resins synthesized with condensate generated during kiln-drying step of wood
Ayrilmis N., Gürel A., Özdemir M., Kapti T.
Wood Research , cilt.63, sa.1, ss.97-104, 2018 (SCI-Expanded, Scopus)
2018
2018180. The Effect of Nanoboron Nitride on Some Properties of Biopolymer Nanocomposites with Cellulose Nanofibrils and Nanoclays
Al G., Aydemir D., Ayrilmis N., Kaygin B., Gunduz G.
DRVNA INDUSTRIJA
, cilt.69, sa.1, ss.43-48, 2018 (SCI-Expanded, Scopus)
2017
2017181. Potential use of cotton dust as filler in the production of thermoplastic composites
Ayrilmis N., Gulec T., Pesman E., Kaymakci A.
JOURNAL OF COMPOSITE MATERIALS , cilt.51, sa.30, ss.4147-4155, 2017 (SCI-Expanded, Scopus)
2017
2017182. Influence of Organically Modified Nanoclay on Thermal and Combustion Properties of Bagasse Reinforced HDPE Nanocomposites
Kord B., Ravanfar P., Ayrilmis N.
JOURNAL OF POLYMERS AND THE ENVIRONMENT
, cilt.25, sa.4, ss.1198-1207, 2017 (SCI-Expanded, Scopus)
2017
2017183. Effects of Core Layer Fiber Size and Face-to-core Layer Ratio on the Properties of Three-layered Fiberboar
AYRILMIŞ N., AKBULUT T., Yurttaş E.
BİORESOURCES , cilt.12, sa.4, ss.0-7974, 2017 (SCI-Expanded, Scopus)
2017
2017184. TECHNOLOGICAL PROPERTIES OF PLYWOOD BONDED WITH PHENOLFORMALDEHYDE RESOL RESIN SYNTHESIZED WITH BIO-OIL
Ayrilmis N., Ozbay G.
CERNE
, cilt.23, sa.4, ss.493-500, 2017 (SCI-Expanded, Scopus)
2017
2017185. Finite element simulations of the loading and deformation of plywood seat shells
VRATUSA S., KARIZ M., Ayrilmis N., KUZMAN M. K.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.75, sa.5, ss.729-738, 2017 (SCI-Expanded, Scopus)
2017
2017186. Effect of wood species, digester conditions, and defibrator disc distance on wettability of fiberboard
Ayrilmis N., BENTHIEN J. T., OHLMEYER M.
JOURNAL OF WOOD SCIENCE
, cilt.63, sa.3, ss.248-252, 2017 (SCI-Expanded, Scopus)
2017
2017187. Weathering Performance of Montmorillonite/Wood Flour-Based Polypropylene Nanocomposites
Kord B., MALEKIAN B., Ayrilmis N.
MECHANICS OF COMPOSITE MATERIALS , cilt.53, sa.2, ss.271-278, 2017 (SCI-Expanded, Scopus)
2017
2017188. Effect of species and grinding disc distance on the surface roughness parameters of medium density fiberboard
GURAU L., Ayrilmis N., BENTHIEN J. T., OHLMEYER M., KUZMAN M. K., RACASAN S.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.75, sa.3, ss.335-346, 2017 (SCI-Expanded, Scopus)
2017
2017189. Water absorption and mechanical properties of PP/HIPS hybrid composites filled with wood flour
Ayrilmis N., TAŞDEMİR M., Akbulut T.
POLYMER COMPOSITES , cilt.38, sa.5, ss.863-869, 2017 (SCI-Expanded, Scopus)
2017
2017190. Preparation and characterization of high-performance wood polymer nanocomposites using multi-walled carbon nanotubes
Kaymakci A., Ayrilmis N., Gulec T., Tufan M.
JOURNAL OF COMPOSITE MATERIALS , cilt.51, ss.1187-1195, 2017 (SCI-Expanded, Scopus)
2017
2017191. THE INFLUENCES OF POPLAR INNER AND OUTER BARK CONTENT ON MECHANICAL PROPERTIES OF WOOD/POLYPROPYLENE COMPOSITES
Hosseinihashemi S. K., SHAMSPOUR M., SAFDARI V., POURMOUSA S., Ayrilmis N.
JOURNAL OF THE CHILEAN CHEMICAL SOCIETY
, cilt.62, sa.1, ss.3365-3369, 2017 (SCI-Expanded, Scopus)
2017
2017192. PHYSICAL, MECHANICAL AND THERMAL PROPERTIES OF WOOD/ZEOLITE/ PLASTIC HYBRID COMPOSITES
Kaymakci A., Gulec T., Hosseinihashemi S. K., Ayrilmis N.
MADERAS-CIENCIA Y TECNOLOGIA
, cilt.19, sa.3, ss.339-348, 2017 (SCI-Expanded, Scopus)
2017
2017193. Effect of wood chip size on hemicellulose extraction and technological properties of flakeboard
Ayrilmis N., KWON J. H., HAN T. H.
TURKISH JOURNAL OF AGRICULTURE AND FORESTRY , cilt.41, sa.5, ss.331-337, 2017 (SCI-Expanded, Scopus, TRDizin)
2017
2017194. Effects of Core Layer Fiber Size and Face-to-core Layer Ratio on the Properties of Three-layered Fiberboard
Ayrilmis N., Akbulut T., Yurttaş E.
BIORESOURCES , cilt.12, sa.4, ss.7964-7974, 2017 (SCI-Expanded, Scopus)
2017
2017195. Technological Properties of Cement-Bonded Composite Board Produced with the Main Veins of Oil Palm (Elaeis guineensis) Particles
Ayrilmis N., Hosseinihashemi S. K., KARIMI M., KARGARFARD A., Kaymakci A., ASHTIANI H. S.
BIORESOURCES
, cilt.12, sa.2, ss.3583-3600, 2017 (SCI-Expanded, Scopus)
2017
2017196. EFFECT OF DOLOMITE POWDER ON COMBUSTION AND TECHNOLOGICAL PROPERTIES OF WPC AND NEAT POLYPROPYLENE
Ozdemir F., AYRILMIŞ N., Mengeloğlu F.
JOURNAL OF THE CHILEAN CHEMICAL SOCIETY , cilt.62, sa.4, ss.3716-3720, 2017 (SCI-Expanded, Scopus)
2017
2017197. Effect of microfibrillated cellulose addition on thermal properties of three grades of urea-formaldehyde resin
Park B. D., AYRILMIŞ N., Kwon J. H., Han T. H.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.72, ss.75-79, 2017 (SCI-Expanded, Scopus)
2016
2016198. Influence of Repeated Injection Molding Processing on Some Mechanical and Thermal Properties of Wood Plastic Composites
Kaymakci A., Ayrilmis N.
BIORESOURCES
, cilt.11, sa.4, ss.10112-10121, 2016 (SCI-Expanded, Scopus)
2016
2016199. Thermal Analysis and Morphological Characterization of Thermoplastic Composites Filled with Almond Shell Flour/Montmorillonite
Hosseinihashemi S. K., Eshghi A., Ayrilmis N., Khademieslam H.
BIORESOURCES
, cilt.11, sa.3, ss.6768-6779, 2016 (SCI-Expanded, Scopus)
2016
2016200. Properties of Honeycomb Paperboards Faced with Heat-Treated Thin Medium-Density Fiberboards
Ayrilmis N., KUZMAN M. K.
BIORESOURCES
, cilt.11, sa.3, ss.7803-7810, 2016 (SCI-Expanded, Scopus)
2016
2016201. Potential Use of Hazelnut Husk in Recycled High-Density Polyethylene Composites
Tufan M., Ayrilmis N.
BIORESOURCES
, cilt.11, sa.3, ss.7476-7489, 2016 (SCI-Expanded, Scopus)
2016
2016202. Technological and Thermal Properties of Thermoplastic Composites Filled with Heat-treated Alder Wood
TUFAN M., GÜLEÇ T., PEŞMAN E., AYRILMIŞ N.
BIORESOURCES
, cilt.11, sa.2, ss.3153-3164, 2016 (SCI-Expanded, Scopus)
2016
2016203. Long-term water absorption behavior of thermoplastic composites produced with thermally treated wood
Hosseinihashemi S. K., Arwinfar F., Najafi A., NEMLİ G., Ayrilmis N.
MEASUREMENT , cilt.86, ss.202-208, 2016 (SCI-Expanded, Scopus)
2016
2016204. SURFACE QUALITY OF WOOD PLASTIC COMPOSITES COATED WITH SOLVENT AND WATER BASED PAINTS
AYRILMIŞ N., Akkuş M., AKBULUT T.
INTERNATIONAL SCIENTIFIC JOURNAL "MACHINES. TECHNOLOGIES. MATERIALS , cilt.10, sa.4, ss.33-35, 2016 (Hakemli Dergi)
2016
2016205. Effect of the Marble Powder and Wood Powder Content on the Technological Properties of Thermoplastic Composites
DÜNDAR T., AYRILMIŞ N., Akkuş M., Ulay G.
Machines Technologies Materials , cilt.10, sa.6, ss.13-16, 2016 (Hakemli Dergi)
2016
2016206. EFFECT OF THE MARBLE POWDER AND WOOD POWDER CONTENT ON THE TECHNOLOGICAL PROPERTIES OF THERMOPLASTIC
DÜNDAR T., AYRILMIŞ N., AKKUŞ M., ULAY G.
International journal for science, technics and innovations for the industry , sa.6, ss.13-16, 2016 (Hakemli Dergi)
2016
2016207. MECHANICAL PROPERTIES OF WOOD POLYPROPYLENE COMPOSITES PRODUCED BY USING RESIN IMPREGNATED PAPER WASTE
AKBULUT T., AKKUŞ M., AYRILMIŞ N.
International journal for science, technics and innovations for the industry , sa.5, ss.38-40, 2016 (Hakemli Dergi)
2016
2016208. Hardness, Decay and Water Resistance of Polypropylene/Montmorillonite/Almond Shell Flour Composites
Hosseinihashemi S. K., ESHGHI A., Kord B., Lashgari A., Ayrilmis N.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS
, cilt.19, sa.2, ss.440-445, 2016 (SCI-Expanded, Scopus)
2016
2016209. SURFACE QUALITY OF WOOD PLASTIC COMPOSITES COATED WITH SOLVENT AND WATER BASED PAINTS
AYRILMIŞ N., AKKUŞ M., AKBULUT T.
International journal for science, technics and innovations for the industry , sa.4, ss.33-35, 2016 (Hakemli Dergi)
2016
2016210. Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose
Ayrilmis N., Lee Y., Kwon J. H., Han T., Kim H.
BUILDING AND ENVIRONMENT , cilt.97, ss.82-87, 2016 (SCI-Expanded, Scopus)
2016
2016211. Mechanical Properties and Morphology of Wood Plastic Composites Produced with Thermally Treated Beech Wood
Arwinfar ., Hosseinihashemi S. K., Latibari A. J., Lashgari A., AYRILMIŞ N.
BIORESOURCES
, cilt.11, sa.1, ss.1494-1504, 2016 (SCI-Expanded, Scopus)
2016
2016212. Microfibrillated-cellulose-modified urea-formaldehyde adhesives with different F/U molar ratios for wood-based composites
Ayrilmis N., KWON J., Lee S., Han T., PARK C.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.30, sa.18, ss.2032-2043, 2016 (SCI-Expanded, Scopus)
2016
2016213. UTILIZATION OF TINDER FUNGUS AS FILLER IN PRODUCTION OF HDPE/WOOD COMPOSITE
KAYMAKCI A., AYRILMIŞ N., AKKILIÇ H.
WOOD RESEARCH , cilt.61, sa.6, ss.885-894, 2016 (SCI-Expanded, Scopus)
2016
2016214. Effect of heat-treatment of flakes on physical and mechanical properties of flakeboard
Kwon J. H., Ayrilmis N.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.74, sa.1, ss.135-136, 2016 (SCI-Expanded, Scopus)
2016
2016215. EFFECT OF HOT-PRESSING PARAMETERS ON SELECTED PROPERTIES OF FLAKEBOARD
KWON J. H., AYRILMIŞ N.
WOOD RESEARCH , cilt.61, sa.6, ss.1033-1040, 2016 (SCI-Expanded, Scopus)
2016
2016216. Use of black locust/poplar wood as filler in thermoplastic composites
Hosseinihashemi S. K., KARIMI S., JAHAN LATIBARI A., TAMJIDI A., Ayrilmis N.
TURKISH JOURNAL OF AGRICULTURE AND FORESTRY , cilt.40, sa.3, ss.327-334, 2016 (SCI-Expanded, Scopus, TRDizin)
2015
2015217. Adhesive characteristics and bonding performance of phenol formaldehyde modified with phenol-rich fraction of crude bio-oil
Aslan M., Ozbay G., Ayrilmis N.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
, cilt.29, sa.24, ss.2679-2691, 2015 (SCI-Expanded, Scopus)
2015
2015218. Effect of wood flour on the properties of PP/HIPS wood plastic composites
AYRILMIŞ N., AKBULUT T., Taşdemir M.
Revista CENIC Ciencias Químicas , cilt.46, ss.14-25, 2015 (Hakemli Dergi)
2015
2015219. Potential use of decayed wood in production of wood plastic composite
Ayrilmis N., Kaymakci A., Gulec T.
INDUSTRIAL CROPS AND PRODUCTS , cilt.74, ss.279-284, 2015 (SCI-Expanded, Scopus)
2015
2015220. UTILIZATION OF TINDER FUNGUS AS FILLER IN MANUFACTURE OF HDPE COMPOSITES
AYRILMIŞ N., KAYMAKCI A., AKKILIÇ H.
PROLIGNO , cilt.11, sa.4, ss.122-129, 2015 (Hakemli Dergi)
2015
2015221. Combined effect of acetylation and wax emulsion on physical and mechanical properties of particleboard
Kwon J. H., Ayrilmis N.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.73, sa.6, ss.845-847, 2015 (SCI-Expanded, Scopus)
2015
2015222. Effect of heat treatment on mechanical properties of selected wood joints
Kuzman M. K., Kutnar A., Ayrilmis N., Kariz M.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.73, sa.5, ss.689-691, 2015 (SCI-Expanded, Scopus)
2015
2015223. Tensile shear strength of wood bonded with urea-formaldehyde with different amounts of microfibrillated cellulose
Kwon J. H., Lee S., Ayrilmis N., Han T. H.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.60, ss.88-91, 2015 (SCI-Expanded, Scopus)
2015
2015224. Effect of log position in European Larch (Larix decidua Mill.) tree on the technological properties of particleboard
Muhcu S., NEMLİ G., Ayrilmis N., Bardak S., Baharoğlu M., Sari B., et al.
SCANDINAVIAN JOURNAL OF FOREST RESEARCH , cilt.30, sa.4, ss.357-362, 2015 (SCI-Expanded, Scopus)
2015
2015225. Bonding performance of wood bonded with adhesive mixtures composed of phenol-formaldehyde and bio-oil
Ozbay G., Ayrilmis N.
INDUSTRIAL CROPS AND PRODUCTS
, cilt.66, ss.68-72, 2015 (SCI-Expanded, Scopus)
2015
2015226. Comparison of some aggregation techniques using group analytic hierarchy process
GROSELJ P., STIRN L. Z., Ayrilmis N., KUZMAN M. K.
EXPERT SYSTEMS WITH APPLICATIONS , cilt.42, sa.4, ss.2198-2204, 2015 (SCI-Expanded, Scopus)
2015
2015227. Effect of wood-derived charcoal content on properties of wood plastic composites
Ayrilmis N., Kwon J. H., Han T. H., Durmus A.
Materials Research
, cilt.18, sa.3, ss.654-659, 2015 (SCI-Expanded, Scopus)
2015
2015228. Potential Use of Waste Marble Powder as Adhesive Filler in the Manufacture of Laminated Veneer Lumber
Ozkaya K., Ayrilmis N., Ozdemir S.
BIORESOURCES
, cilt.10, sa.1, ss.1686-1695, 2015 (SCI-Expanded, Scopus)
2014
2014229. Improving Bending and Tensile Properties of Lignocellulosic Filled Polypropylene Composite Panels Using Aramid Fabric
Ayrilmis N., Kwon J. H., HAN T. H.
FIBERS AND POLYMERS , cilt.15, sa.11, ss.2410-2415, 2014 (SCI-Expanded, Scopus)
2014
2014230. Properties of solid wood and laminated wood lumber manufactured by cold pressing and heat treatment
Kwon J. H., SHIN R., Ayrilmis N., HAN T. H.
MATERIALS & DESIGN , cilt.62, ss.375-381, 2014 (SCI-Expanded, Scopus)
2014
2014231. LIGNOCELLULOSIC FIBERS AND NANOCELLULOSE AS REINFORCING FILLER IN THERMOPLASTIC COMPOSITES
AYRILMIŞ N., Ashori A.
EURASIAN JOURNAL OF FOREST SCIENCE , cilt.2, sa.2, ss.1-6, 2014 (TRDizin)
2014
2014232. IMPROVING DIMENSIONAL STABILITY OF INJECTION MOLDED WOOD PLASTIC COMPOSITES USING COLD AND HOT WATER EXTRACTION METHODS
Ozdemir F., Ayrilmis N., Kaymakci A., Kwon J. H.
MADERAS-CIENCIA Y TECNOLOGIA
, cilt.16, sa.3, ss.365-372, 2014 (SCI-Expanded, Scopus)
2014
2014233. Combined Effect of Thermoplastic and Thermosetting Adhesives on Properties of Particleboard With Rice Husk Core
Kwon J. H., Ayrilmis N., HAN T. H.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS
, cilt.17, sa.5, ss.1309-1315, 2014 (SCI-Expanded, Scopus)
2014
2014234. Waste chestnut shell as a source of reinforcing fillers for polypropylene composites
Kaymakci A., Ayrilmis N.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
, cilt.27, sa.8, ss.1054-1064, 2014 (SCI-Expanded, Scopus)
2014
2014235. Effects of hardener type, urea usage and conditioning period on the quality properties of particleboard
Atar I., NEMLİ G., Ayrilmis N., BAHAROGLU M., Sari B., Bardak S.
MATERIALS & DESIGN , cilt.56, ss.91-96, 2014 (SCI-Expanded, Scopus)
2014
2014236. Surface roughness and wettability of polypropylene composites filled with fast-growing biomass: Paulownia elongata wood
Kaymakci A., Ayrilmis N.
JOURNAL OF COMPOSITE MATERIALS , cilt.48, sa.8, ss.951-957, 2014 (SCI-Expanded, Scopus)
2014
2014237. Investigation of correlation between Brinell hardness and tensile strength of wood plastic composites
Kaymakci A., Ayrilmis N.
COMPOSITES PART B-ENGINEERING , cilt.58, ss.582-585, 2014 (SCI-Expanded, Scopus)
2014
2014238. Effect of paraffin application technique on the physical and mechanical properties of particleboard
Baharoglu M., NEMLİ G., Sari B., Ayrilmis N., Bardak S., Zekovic E.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.21, sa.2, ss.191-195, 2014 (SCI-Expanded, Scopus)
2014
2014239. Effect of outdoor storage conditions of wood chip pile on the technological properties of wood-based panel
ERGUEL E., Ayrilmis N.
BIOMASS & BIOENERGY , cilt.61, ss.66-72, 2014 (SCI-Expanded, Scopus)
2014
2014240. Mechanical and Thermal Properties of Wood-Plastic Composites Reinforced With Hexagonal Boron Nitride
Ayrilmis N., Dundar T., Kaymakci A., Ozdemir F., Kwon J. H.
POLYMER COMPOSITES , cilt.35, sa.1, ss.194-200, 2014 (SCI-Expanded, Scopus)
2013
2013241. Utilization of Sunflower Stalk in Manufacture of Thermoplastic Composite
Kaymakci A., Ayrilmis N., Ozdemir F., Gulec T.
JOURNAL OF POLYMERS AND THE ENVIRONMENT , cilt.21, sa.4, ss.1135-1142, 2013 (SCI-Expanded, Scopus)
2013
2013242. Comparison of passive house construction types using analytic hierarchy process
KUZMAN M. K., GROSELJ P., Ayrilmis N., ZBASNIK-SENEGACNIK M.
ENERGY AND BUILDINGS , cilt.64, ss.258-263, 2013 (SCI-Expanded, Scopus)
2013
2013243. Sunflower seed cake as reinforcing filler in thermoplastic composites
Ayrilmis N., Kaymakci A., Ozdemir F.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.129, sa.3, ss.1170-1178, 2013 (SCI-Expanded, Scopus)
2013
2013244. Electromagnetic interference shielding effectiveness, electrical resistivity and mechanical performance of carbonized medium density fiberboard
Kwon J. H., PARK S. B., Ayrilmis N., KIM N. H., KWON S. M.
JOURNAL OF COMPOSITE MATERIALS , cilt.47, sa.16, ss.1951-1958, 2013 (SCI-Expanded, Scopus)
2013
2013245. Physical, mechanical, and thermal properties of polypropylene composites filled with walnut shell flour
Ayrilmis N., Kaymakci A., Ozdemir F.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY , cilt.19, sa.3, ss.908-914, 2013 (SCI-Expanded, Scopus)
2013
2013246. Fast growing biomass as reinforcing filler in thermoplastic composites: Paulownia elongata wood
Ayrilmis N., Kaymakci A.
INDUSTRIAL CROPS AND PRODUCTS , cilt.43, ss.457-464, 2013 (SCI-Expanded, Scopus)
2013
2013247. Mechanical performance of composites based on wastes of polyethylene aluminum and lignocellulosics
Ayrilmis N., Kaymakci A., Akbulut T., Elmas G.
COMPOSITES PART B-ENGINEERING , cilt.47, ss.150-154, 2013 (SCI-Expanded, Scopus)
2013
2013248. Potential utilization of burned wood in manufacture of medium density fiberboard
Akgul M., Ayrilmis N., Camlibel O., Korkut S.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT , cilt.15, sa.2, ss.195-201, 2013 (SCI-Expanded, Scopus)
2013
2013249. Effect of carbonization temperature on electrical resistivity and physical properties of wood and wood-based composites
Kwon J. H., PARK S. B., Ayrilmis N., OH S. W., KIM N. H.
COMPOSITES PART B-ENGINEERING , cilt.46, ss.102-107, 2013 (SCI-Expanded, Scopus)
2013
2013250. Surface Properties and Hardness of Polypropylene Composites Filled With Sunflower Stalk Flour
Kaymakci A., Ayrilmis N., Gulec T.
BIORESOURCES , cilt.8, sa.1, ss.592-602, 2013 (SCI-Expanded, Scopus)
2013
2013251. Combined effects of boron and compatibilizer on dimensional stability and mechanical properties of wood/HDPE composites
Ayrilmis N.
COMPOSITES PART B-ENGINEERING , cilt.44, sa.1, ss.745-749, 2013 (SCI-Expanded, Scopus)
2013
2013252. Utilization of extract of fresh tree leaves as extender in synthetic adhesives for laminated veneer lumber (LVL)
Ozkaya K., Ayrilmis N., Dizel T., Imirzi H. O.
INDUSTRIAL CROPS AND PRODUCTS , cilt.44, ss.67-70, 2013 (SCI-Expanded, Scopus)
2013
2013253. Enhancement of flexural properties and dimensional stability of rice husk particleboard using wood strands in face layers
Kwon J. H., Ayrilmis N., HAN T. H.
COMPOSITES PART B-ENGINEERING , cilt.44, sa.1, ss.728-732, 2013 (SCI-Expanded, Scopus)
2013
2013254. The Influences of Drying Temperature of Wood Particles on the Quality Properties of Particleboard Composite
Sari B., NEMLİ G., Ayrilmis N., Baharoglu M., Bardak S.
DRYING TECHNOLOGY , cilt.31, sa.1, ss.17-23, 2013 (SCI-Expanded, Scopus)
2013
2013255. Effect of Resination Technique on Mechanical Properties of Medium Density Fiberboard
Ayrilmis N., KARA M. E.
BIORESOURCES , cilt.8, sa.1, ss.420-426, 2013 (SCI-Expanded, Scopus)
2012
2012256. Improving core bond strength and dimensional stability of particleboard using polymer powder in core layer
Ayrilmis N., Kwon J. H., HAN T. H.
COMPOSITES PART B-ENGINEERING , cilt.43, sa.8, ss.3462-3466, 2012 (SCI-Expanded, Scopus)
2012
2012257. Determination of Mechanical Behaviour of Wood Polymer Composites Manufactured Using Waste Aluminium Polyethylene (Tetra Pak) and Brass Handle
Kaymakci A., AYRILMIŞ N., AKBULUT T.
TARIH KULTUR VE SANAT ARASTIRMALARI DERGISI-JOURNAL OF HISTORY CULTURE AND ART RESEARCH , cilt.1, sa.4, ss.334-344, 2012 (ESCI)
2012
2012258. Effect of resin type and content on properties of composite particleboard made of a mixture of wood and rice husk
Ayrilmis N., Kwon J. H., Han T. H.
International Journal of Adhesion and Adhesives , cilt.38, ss.79-83, 2012 (SCI-Expanded, Scopus)
2012
2012259. Effect of boron and phosphate compounds on physical, mechanical, and fire properties of wood-polypropylene composites
Ayrilmis N., Akbulut T., Dundar T., White R. H., Mengeloglu F., Buyuksari U., et al.
CONSTRUCTION AND BUILDING MATERIALS , cilt.33, ss.63-69, 2012 (SCI-Expanded, Scopus)
2012
2012260. The influence of moisture content of raw material on the physical and mechanical properties, surface roughness, wettability, and formaldehyde emission of particleboard composite
Baharoglu M., NEMLİ G., Sari B., Bardak S., Ayrilmis N.
COMPOSITES PART B-ENGINEERING , cilt.43, sa.5, ss.2448-2451, 2012 (SCI-Expanded, Scopus)
2012
2012261. Reduction of formaldehyde emission from light MDF panels by adding chestnut shell flour
Ayrilmis N., Kaymakci A.
HOLZFORSCHUNG , cilt.66, sa.4, ss.443-446, 2012 (SCI-Expanded, Scopus)
2012
2012262. Effects of formulation variables on surface properties of wood plastic composites
Ayrilmis N., BENTHIEN J. T., THOEMEN H.
COMPOSITES PART B-ENGINEERING , cilt.43, sa.2, ss.325-331, 2012 (SCI-Expanded, Scopus)
2012
2012263. Enhancement of dimensional stability and mechanical properties of light. MDF by adding melamine resin impregnated paper waste
Ayrilmis N.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.33, ss.45-49, 2012 (SCI-Expanded, Scopus)
2012
2012264. Mechanical and physical properties of medium density fiberboard panels laminated with thermally compressed veneer
Buyuksari U., HIZIROĞLU S., Akkilic H., Ayrilmis N.
COMPOSITES PART B-ENGINEERING , cilt.43, sa.2, ss.110-114, 2012 (SCI-Expanded, Scopus)
2012
2012265. Compression Wood as a Source of Reinforcing Filler for Thermoplastic Composites
Buyuksari U., Ayrilmis N., Akbulut T.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.123, sa.3, ss.1740-1745, 2012 (SCI-Expanded, Scopus)
2012
2012266. FIRE PERFORMANCE OF LVL PANELS TREATED WITH FIRE RETARDANT CHEMICALS
Candan Z., Ayrilmis N., Dundar T., Atar M.
WOOD RESEARCH , cilt.57, sa.4, ss.651-658, 2012 (SCI-Expanded, Scopus)
2012
2012267. Effects of fire retardants on physical, mechanical, and fire properties of flat-pressed WPCs
Ayrilmis N., BENTHIEN J. T., THOEMEN H., White R. H.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.70, ss.215-224, 2012 (SCI-Expanded, Scopus)
2011
2011268. Properties of Flat-Pressed Wood Plastic Composites Containing Fire Retardants
Ayrilmis N., BENTHIEN J. T., THOEMEN H., White R. H.
JOURNAL OF APPLIED POLYMER SCIENCE
, cilt.122, sa.5, ss.3201-3210, 2011 (SCI-Expanded, Scopus)
2011
2011269. Coir Fiber Reinforced Polypropylene Composite Panel for Automotive Interior Applications
Ayrilmis N., JARUSOMBUTI S., FUEANGVIVAT V., BAUCHONGKOL P., White R. H.
FIBERS AND POLYMERS , cilt.12, sa.7, ss.919-926, 2011 (SCI-Expanded, Scopus)
2011
2011270. Surface characteristics and overlaying properties of flat-pressed wood plastic composites
JARUSOMBUTI S., Ayrilmis N.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.69, sa.3, ss.375-382, 2011 (SCI-Expanded, Scopus)
2011
2011271. Effect of Thermal Treatment of Fast Growing Wood Fibers on Physical and Mechanical Properties of Light Medium Density Fiberboard
JARUSOMBUTI S., Ayrilmis N., FUEANGVIVAT V., BAUCHONGKOL P.
HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.30, sa.3, ss.241-246, 2011 (SCI-Expanded, Scopus)
2011
2011272. Effect of Boron and Phosphate Compounds on Thermal and Fire Properties of Wood/HDPE Composites
Akbulut T., Ayrılmış N., Dündar T., Durmuş A., White R. H., Teker M.
International Journal of Polymers and Technologies , cilt.3, sa.2, ss.67-75, 2011 (Hakemli Dergi)
2011
2011273. Effect of thermal-treatment of wood fibres on properties of flat-pressed wood plastic composites
Ayrilmis N., JARUSOMBUTI S., FUEANGVIVAT V., BAUCHONGKOL P.
POLYMER DEGRADATION AND STABILITY , cilt.96, sa.5, ss.818-822, 2011 (SCI-Expanded, Scopus)
2011
2011274. PARTICLEBOARD AND MDF PANELS MADE FROM A MIXTURE OF WOOD AND PINECONES: RESISTANCE TO DECAY FUNGI AND TERMITES UNDER LABORATORY CONDITIONS
Kose C., Terzi E., Buyuksari U., Avci E., Ayrilmis N., Kartal S. N., et al.
BIORESOURCES , cilt.6, sa.2, ss.2045-2054, 2011 (SCI-Expanded, Scopus)
2011
2011275. DIMENSIONAL STABILITY PERFORMANCE OF FIRE RETARDANT TREATED VENEER-ORIENTED STRANDBOARD COMPOSITES
Candan Z., Ayrilmis N., Akbulut T.
BIORESOURCES , cilt.6, sa.1, ss.308-316, 2011 (SCI-Expanded, Scopus)
2011
2011276. Enhancement of Dimensional Stability of Biocomposites Containing Agricultural Waste by Heat-Treatment Method
Ayrilmis N., Buyuksari U.
DRYING TECHNOLOGY
, cilt.29, sa.5, ss.591-598, 2011 (SCI-Expanded, Scopus)
2011
2011277. Flat-pressed Wood Plastic Composite as an Alternative to Conventional Wood-based Panels
Ayrilmis N., JARUSOMBUTI S.
JOURNAL OF COMPOSITE MATERIALS , cilt.45, sa.1, ss.103-112, 2011 (SCI-Expanded, Scopus)
2011
2011278. EFFECTS OF THERMAL TREATMENT OF RUBBERWOOD FIBRES ON PHYSICAL AND MECHANICAL PROPERTIES OF MEDIUM DENSITY FIBREBOARD
Ayrilmis N., JARUSOMBUTI S., FUEANGVIVAT V., BAUCHONGKOL P.
JOURNAL OF TROPICAL FOREST SCIENCE , cilt.23, sa.1, ss.10-16, 2011 (SCI-Expanded, Scopus)
2011
2011279. EFFECT OF FIRE RETARDANTS ON SURFACE ROUGHNESS AND WETTABILITY OF WOOD PLASTIC COMPOSITE PANELS
Ayrilmis N.
BIORESOURCES , cilt.6, sa.3, ss.3178-3187, 2011 (SCI-Expanded, Scopus)
2010
2010280. Waste Pine Cones as a Source of Reinforcing Fillers for Thermoplastic Composites
Ayrilmis N., Buyuksari U., Dundar T.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.117, sa.4, ss.2324-2330, 2010 (SCI-Expanded, Scopus)
2010
2010281. Bending strength and modulus of elasticity of wood-based panels at cold and moderate temperatures
Ayrilmis N., Buyuksari U., As N.
COLD REGIONS SCIENCE AND TECHNOLOGY , cilt.63, ss.40-43, 2010 (SCI-Expanded, Scopus)
2010
2010282. Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite
Ayrilmis N., Buyuksari U.
JOURNAL OF MATERIALS SCIENCE , cilt.45, sa.5, ss.1336-1342, 2010 (SCI-Expanded, Scopus)
2010
2010283. Fungicide and insecticide properties of cardboard panels made from used beverage carton with veneer overlay
Sen S., Ayrilmis N., Candan Z.
AFRICAN JOURNAL OF AGRICULTURAL RESEARCH
, cilt.5, sa.2, ss.159-165, 2010 (SCI-Expanded, Scopus)
2010
2010284. VARIATIONS IN HARDNESS AND SCREW WITHDRAWAL RESISTANCE OF HEAT-TREATED MEDIUM DENSITY FIBERBOARDS
Ayrilmis N.
WOOD RESEARCH , cilt.55, sa.1, ss.111-116, 2010 (SCI-Expanded, Scopus)
2010
2010285. SURFACE CHARACTERISTICS AND OVERLAYING PROPERTIES OF MDF PANELS MADE FROM THERMALLY TREATED RUBBERWOOD FIBERS
JARUSOMBUTI S., Ayrilmis N., BAUCHONGKOL P., FUEANGVIVAT V.
BIORESOURCES , cilt.5, sa.2, ss.968-978, 2010 (SCI-Expanded, Scopus)
2010
2010286. EFFECT OF PINE CONE RATIO ON THE WETTABILITY AND SURFACE ROUGHNESS OF PARTICLEBOARD
Buyuksari U., Avci E., Ayrilmis N., Akkilic H.
BIORESOURCES , cilt.5, sa.3, ss.1824-1833, 2010 (SCI-Expanded, Scopus)
2010
2010287. Effect of Sanding on Surface Properties of Medium Density Fiberboard
Ayrilmis N., Candan Z., Akbulut T., Balkiz O. D.
DRVNA INDUSTRIJA , cilt.61, sa.3, ss.175-181, 2010 (SCI-Expanded, Scopus)
2010
2010288. Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones
Buyuksari U., Ayrilmis N., Avci E., KOÇ E.
BIORESOURCE TECHNOLOGY
, cilt.101, sa.1, ss.255-259, 2010 (SCI-Expanded, Scopus)
2010
2010289. UTILIZATION OF OLIVE MILL SLUDGE IN THE MANUFACTURE OF FIBERBOARD
Ayrilmis N., Buyuksari U.
BIORESOURCES , cilt.5, sa.3, ss.1859-1867, 2010 (SCI-Expanded, Scopus)
2009
2009290. Utilization of pine (Pinus pinea L.) cone in manufacture of wood based composite
Ayrilmis N., Buyuksari U., Avci E., KOÇ E.
FOREST ECOLOGY AND MANAGEMENT
, cilt.259, sa.1, ss.65-70, 2009 (SCI-Expanded, Scopus)
2009
2009291. Surface Characteristics and Hardness of Medium Density Fiberboard Containing Pine Cone
Ayrilmis N., Avci E., Buyuksari U.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY , cilt.3, sa.4, ss.393-400, 2009 (SCI-Expanded, Scopus)
2009
2009292. Dimensional Stability of Fire-Retardant-Treated Laminated Veneer Lumber
Dundar T., Ayrilmis N., Candan Z., ŞAHİN H.
FOREST PRODUCTS JOURNAL , cilt.59, ss.18-23, 2009 (SCI-Expanded, Scopus)
2009
2009293. Utilization of waste tire rubber in manufacture of oriented strandboard
Ayrilmis N., Buyuksari U., Avci E.
WASTE MANAGEMENT , cilt.29, sa.9, ss.2553-2557, 2009 (SCI-Expanded, Scopus)
2009
2009294. Evaluation of possible decay and termite resistance of particleboard containing waste tire rubber
Terzi E., Kose C., Buyuksari U., Avci E., Ayrilmis N., Kartal S. N.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION , cilt.63, sa.6, ss.806-809, 2009 (SCI-Expanded, Scopus)
2009
2009295. Dimensional stability and creep behavior of heat-treated exterior medium density fiberboard
Ayrilmis N., LAUFENBERG T. L., WINANDY J. E.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.67, sa.3, ss.287-295, 2009 (SCI-Expanded, Scopus)
2009
2009296. WETTABILITY OF FIRE RETARDANT TREATED LAMINATED VENEER LUMBER (LVL) MANUFACTURED FROM VENEERS DRIED AT DIFFERENT TEMPERATURES
Ayrilmis N., Dundar T., Candan Z., Akbulut T.
BIORESOURCES , cilt.4, sa.4, ss.1536-1544, 2009 (SCI-Expanded, Scopus)
2009
2009297. Wettability Fire Reterdant Laminated Veneer Lumber (LVL) Manufactured From Veneers Dried Different Temperatures
AYRILMIŞ N., DÜNDAR T., CANDAN Z., AKBULUT T.
BIORESOURCES , cilt.4, sa.4, ss.1535-1543, 2009 (SCI-Expanded, Scopus)
2009
2009298. Utilization of Waste Tire Rubber in the Manufacturing of Particleboard
Ayrilmis N., Buyuksari U., Avci E.
MATERIALS AND MANUFACTURING PROCESSES , cilt.24, sa.6, ss.688-692, 2009 (SCI-Expanded, Scopus)
2009
2009299. Effects of Post Heat-Treatment on Surface Characteristics and Adhesive Bonding Performance of Medium Density Fiberboard
Ayrilmis N., WINANDY J. E.
MATERIALS AND MANUFACTURING PROCESSES
, cilt.24, sa.5, ss.594-599, 2009 (SCI-Expanded, Scopus)
2008
2008300. Physical and mechanical properties of cardboard panels made from used beverage carton with veneer overlay
Ayrilmis N., Candan Z., HIZIROGLU S.
MATERIALS & DESIGN , cilt.29, sa.10, ss.1897-1903, 2008 (SCI-Expanded, Scopus)
2008
2008301. MDF ve Yongalevhada Biçim Bozukluğuna (Çarpılma) Neden Olan Önemli Faktörler. İ.Ü. Orman Fakültesi Dergisi , 2008, Cilt 58, Sayı 2, s.81-98
AKBULUT T., AYRILMIŞ N.
İstanbul Üniversitesi Orman Fakültesi Dergisi
, cilt.58, sa.2, ss.81-98, 2008 (SCI-Expanded, Scopus, TRDizin)
2008
2008302. Effect of compression wood on dimensional stability of medium density fiberboard
Ayrilmis N.
SILVA FENNICA
, cilt.42, sa.2, ss.285-293, 2008 (SCI-Expanded, Scopus)
2008
2008303. Evaluation of surface roughness of laminated veneer lumber (LVL) made from beech veneers treated with various fire retardants and dried at different temperatures
Dundar T., Ayrilmis N., Candan Z.
FOREST PRODUCTS JOURNAL , cilt.58, ss.71-76, 2008 (SCI-Expanded, Scopus)
2007
2007304. Physical, mechanical, and fire properties of oriented strandboard with fire retardant treated veneers Physikalische, Mechanische Sowie Brandeigenschaften von OSB mit Feuerschutzmittel Imprägnierten Deckfurnieren
Ayrilmis N., Candan Z., White R.
Holz als Roh - und Werkstoff , cilt.65, sa.6, ss.449-458, 2007 (SCI-Expanded, Scopus)
2007
2007305. Effect of panel density on dimensional stability of medium and high density fiberboards
Ayrilmis N.
Journal of Materials Science , cilt.42, sa.20, ss.8551-8557, 2007 (SCI-Expanded, Scopus)
2007
2007306. Effects of various fire-retardants on plate shear and five-point flexural shear properties of plywood
Ayrilmis N., WINANDY J. E.
FOREST PRODUCTS JOURNAL , cilt.57, sa.4, ss.44-49, 2007 (SCI-Expanded, Scopus)
2007
2007307. Decay and termite resistance of plywood treated with various fire retardants
Kartal S. N., Ayrilmis N., Imamura Y.
BUILDING AND ENVIRONMENT , cilt.42, sa.3, ss.1207-1211, 2007 (SCI-Expanded, Scopus)
2007
2007308. Effect of fire retardants on internal bond strength and bond durability of structural fiberboard
Ayrilmis N.
Building and Environment , cilt.42, sa.3, ss.1200-1206, 2007 (SCI-Expanded, Scopus)
2006
2006309. Effect of various tire retardants on surface roughness of plywood
Ayrilmis N., KORKUT S., Tanritanir E., WINANDY J., HIZIROGLU S.
BUILDING AND ENVIRONMENT , cilt.41, sa.7, ss.887-892, 2006 (SCI-Expanded, Scopus)
2006
2006310. Selected physical and mechanical properties of LVL made from Pterocarya fraxinifolia (Lam.) Spach
Gungor N. M., Ayrılmış N., Kantay R.
FOREST PRODUCTS JOURNAL , cilt.56, sa.5, ss.82-85, 2006 (SCI-Expanded, Scopus)
2006
2006311. Fire and bending properties of blockboard with fire retardant treated veneers
LAUFENBERG T., Ayrilmis N., WHITE R.
HOLZ ALS ROH-UND WERKSTOFF , cilt.64, sa.2, ss.137-143, 2006 (SCI-Expanded, Scopus)
2006
2006312. Effect of compression wood on surface roughness and surface absorption of medium density fiberboard
Akbulut T., Ayrilmis N.
SILVA FENNICA
, cilt.40, sa.1, ss.161-167, 2006 (SCI-Expanded, Scopus)
2005
2005313. Physical and mechanical properties and fire, decay, and termite resistance of treated oriented strandboard
Ayrilmis N., Kartal S., Laufenberg T., Winandy J., White R.
FOREST PRODUCTS JOURNAL , cilt.55, sa.5, ss.74-81, 2005 (SCI-Expanded, Scopus)
2005
2005314. Blockboard with boron-treated veneers: laboratory decay and termite resistance tests
Kartal S. N., Ayrilmis N.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION , cilt.55, sa.2, ss.93-98, 2005 (SCI-Expanded, Scopus)
2005
2005315. Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood
ÜNSAL Ö., AYRILMIŞ N.
JOURNAL OF WOOD SCIENCE , cilt.51, sa.4, ss.405-409, 2005 (SCI-Expanded, Scopus)
2004
2004316. Türkiye’de Üretilen MDF Levhaların Teknolojik Özellikleri
GÖKER Y., AKBULUT T., AYRILMIŞ N.
İstanbul Üniversitesi Orman Fakültesi Dergisi , cilt.54, sa.1, ss.13-36, 2004 (SCI-Expanded, Scopus, TRDizin)
2004
2004317. The effect of steaming on equilibrium moisture content in beech wood (Fagus orientalis Lipsky)
ÜNSAL Ö., AYRILMIŞ N.
FOREST PRODUCTS JOURNAL , cilt.54, sa.6, ss.90-93, 2004 (SCI-Expanded, Scopus)
2004
2004318. Influence of compression wood on physical and mechanical properties of medium density fiberboard
Akbulut T., Ayrilmis N., KOÇ E.
WOOD RESEARCH , cilt.49, sa.3, ss.17-24, 2004 (SCI-Expanded, Scopus)
2002
2002319. OSB Levhaların Kontrplak Yerine Kullanılması
AKBULUT T., GÖKER Y., AYRILMIŞ N.
İstanbul Üniversitesi Orman Fakültesi Dergisi , cilt.52, sa.1, ss.65-79, 2002 (SCI-Expanded, Scopus, TRDizin)
2001
2001320. MDF Üretiminde Dikkate Alınması Gereken Hususlar
AKBULUT T., AYRILMIŞ N.
İstanbul Üniversitesi Orman Fakültesi Dergisi , cilt.51, sa.2, ss.25-42, 2001 (SCI-Expanded, Scopus, TRDizin)
2000
2000321. Surface absorption, surface roughness, and formaldehyde emission of Turkish medium density fiberboard
Akbulut T., HIZIROĞLU S., Ayrilmis N.
FOREST PRODUCTS JOURNAL , cilt.50, sa.6, ss.45-48, 2000 (SCI-Expanded, Scopus)
1999
1999322. The Technological Properties and Use of Carob (Ceratonia siliqua L.) Wood
GÖKER Y., AS N., AKBULUT T., AYRILMIŞ N.
İ.Ü. Orman Fakültesi Dergisi , cilt.49, sa.2, ss.43-58, 1999 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2021
20211. THE ENGINEERED WOOD PRODUCTS APPLICATION IN VERNACULAR AND CONTEMPORARY ARCHITECTURE IN MACEDONIA
Janakieska M. M., AYRILMIŞ N., Kuzman M. K.
14th International Scientific Conference of International-Association-for-Economics-and-Management-in-Wood-Processing-and-Furniture-Manufacturing (WoodEMA) on The Response of the Forest-Based Sector to Changes in the Global Economy, Koper, Slovenya, 16 - 18 Haziran 2021, ss.387-392, (Tam Metin Bildiri)
2019
20192. Effect of tree species used in the core layer on technological properties of three-layer fibreboard.
AYRILMIŞ N., AKBULUT T.
International Conference on Technology and Science, Burdur, Türkiye, 14 - 16 Kasım 2019, cilt.2, ss.332-338, (Tam Metin Bildiri)
2019
20193. Impact response of basalt composite pipe using filament winding
Manojprabhakar M., Rajini N., Mayandi K., Subash K., Subramanian S., Ramabala Seelan S. V., et al.
2nd International Conference on New Frontiers in Engineering, Science and Technology, NFEST 2019, Kurukshetra, Haryana, Hindistan, 18 - 22 Şubat 2019, cilt.1240, (Tam Metin Bildiri)
2019
20194. FIRE BEHAVIOUR OF 3D PRINTED PLA AND WOOD/PLA COMPOSITES
Kuzman M. K., Kariz M., AYRILMIŞ N., Sernek M., Zigon J., Xu Q.
12th WoodEMA Annual International Scientific Conference on Digitalisation and Circular Economy: Forestry and Forestry Based Industry Implications, Varna, Bulgaristan, 11 - 13 Eylül 2019, ss.149-154, (Tam Metin Bildiri)
2018
20185. Friction and Wear Properties of PTFE Blended ABS Polymer Composite
Kumar R. M., Rajini N., Mayandi K., AYRILMIŞ N.
2nd International Conference on Polymer Composites (ICPC), Surathkal, Hindistan, 14 - 15 Aralık 2018, cilt.2057, (Tam Metin Bildiri)
2018
20186. Surface roughness and wettability of heat treated Norway spruce (Picea Abies Karst)
Ayrilmis N., Kariz M., Kwon J. H., Kuzman M. K.
2018 World Conference on Timber Engineering, WCTE 2018, Seoul, Güney Kore, 20 - 23 Ağustos 2018, (Tam Metin Bildiri)
2018
20187. USE OF WOOD IN 3D PRINTING TECHNOLOGY - Case Studies
AYRILMIŞ N., Kuzman M. K., Sernek M., Kariz M.
11th Annual Internatinal Scientific Conference on Increasing the Use of Wood in the Global Bio-Economy, Belgrade, Sırbistan Ve Karadağ, 26 - 28 Eylül 2018, ss.283-289, (Tam Metin Bildiri)
2017
20178. - Technological properties of fibreboard produced with thermosetting resins modified with condensate generated during kilndrying step of wood
AYRILMIŞ N., Kaptı T.
“5th International Conference on Environmental Science and Technology (ICOEST), Budapeşte, Macaristan, 19 Ekim 2017 - 23 Kasım 2019, ss.62, (Özet Bildiri)
2017
20179. Effect of surface/core layer ratio on some physical and mechanical properties of three-layered medium density fiberboard
AYRILMIŞ N., AKBULUT T.
International Conference on Agriculture, Forest, Food Sciences and Technologies (ICAFOF 2017 Cappadocia / Turkey), Nevşehir, Türkiye, 15 Mayıs - 17 Haziran 2017, ss.647, (Özet Bildiri)
2016
201610. Effect of Heat Treatment on Some Properties of Wood Plastic Composites
Birinci E., Kaymakçı A., DÜNDAR T., AYRILMIŞ N.
IFS International Forestry Symposium, Kastamonu, Türkiye, 7 - 10 Aralık 2016, ss.1, (Tam Metin Bildiri)
2016
201611. SOME PHYSICAL AND MECHANICAL PROPERTIES OF OSB PANELS FACED WITH THIN MDF
AYRILMIŞ N., AKKUŞ M.
II. INTERNATIONAL FURNITURE CONGRESS, Muğla, Türkiye, 13 - 15 Ekim 2016, ss.595-598, (Tam Metin Bildiri)
2016
201612. CHARACTERİZATİON OF WOOD POLYPROPYLENE COMPOSİTES BY REİNFORCED PUMİCE’S POWDER
AKKUŞ M., ULAY G., AYRILMIŞ N.
Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı Kapadokya (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.476-481, (Tam Metin Bildiri)
2016
201613. GÜÇLENDİRİLMİŞ AHŞAP KOMPOZİT LEVHALARIN YAPISI VE KULLANIMI
Yurttaş E., AYRILMIŞ N., AKBULUT T.
International conference of material science and Technologia in cappadocia, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.197-200, (Tam Metin Bildiri)
2016
201614. SURFACE QUALITY OF WOOD PLASTIC COMPOSITES COATED WITH SOLVENT AND WATER BASED PAINTS
AYRILMIŞ N., AKKUŞ M., AKBULUT T.
XIII INTERNATIONAL SCIENTIFIC CONGRESS MACHINES. TECHNOL?GIES. MATERIALS. 2016, Borovets, Bulgaristan, 16 - 19 Mart 2016, cilt.3, sa.189, ss.7-9, (Tam Metin Bildiri)
2016
201615. Mechanical Properties of Wood Polypropylen Composites Produced By Using Resin Impregnated Paper Waste
AKBULUT T., AKKUŞ M., AYRILMIŞ N.
XIII. International Congress- Winner Session “ Machines. Technologies. Materials”, Borovets, Bulgaristan, 16 - 19 Mart 2016, cilt.10, sa.5, ss.38-40, (Tam Metin Bildiri)
2016
201616. Production of layered MDF panel having fine fibers in face layers and coarse fibers in core layer for furniture industry
Yurttaş E., AYRILMIŞ N., AKBULUT T.
The Winter Session of XIII International Congress "Machines, Technol?gies, Materials, Borovets, Bulgaristan, 16 - 19 Mart 2016, (Tam Metin Bildiri)
2015
201517. Catalytic heat treatment of wood
AYRILMIŞ N., Özçifçi A., Özbay G., Altun S., KÖKTEN E. S.
The 10th International Conference “WOOD SCIENCE AND ENGINEERING IN THE THIRD MILLENNIUM” ICWSE 2015 November 5-7, 2015 TRANSILVANIA University, Brasov, ROMANIA, Brasov, Romanya, 5 - 07 Kasım 2015, cilt.11, sa.4, ss.337-343, (Tam Metin Bildiri)
2015
201518. IMPACTS OF IMPREGNATION WITH SOME CHEMICALS ON THE SHEAR STRENGTH OF OAK (QUERCUS PETRAEA SUBSP. IBERICA) AND SCOTS PINE (PINUS SYLVESTRIS L.)
Kol H. Ş., AYRILMIŞ N., Özbay G.
The 10th International Conference “WOOD SCIENCE AND ENGINEERING IN THE THIRD MILLENNIUM” ICWSE 2015 November 5-7, 2015 TRANSILVANIA University, Brasov, ROMANIA, Brasov, Romanya, 5 - 07 Kasım 2015, cilt.11, sa.4, ss.283-287, (Tam Metin Bildiri)
2015
201519. LONG TERM WATER ABSORPTION PROPERTIES OF WOOD POLYMER NANOCOMPOSITES (WPN)
Kaymakcı A., AYRILMIŞ N.
INTERNATIONAL CONFERENCE “WOOD SCIENCE AND ENGINEERING IN THE THIRD MILLENNIUM” 10th edition, Brasov, Romanya, 5 - 07 Kasım 2015, ss.819-822, (Tam Metin Bildiri)
2015
201520. UTILIZATION OF TINDER FUNGUS AS FILLER IN MANUFACTURE OF HDPE COMPOSITES
AYRILMIŞ N., KAYMAKCI A., AKKILIÇ H.
The 10th International Conference “WOOD SCIENCE AND ENGINEERING IN THE THIRD MILLENNIUM” ICWSE 2015 November 5-7, 2015 TRANSILVANIA University, Brasov, ROMANIA, Brasov, Romanya, 5 Kasım - 07 Aralık 2015, cilt.11, sa.4, ss.122-129, (Tam Metin Bildiri)
2015
201521. EFFECTS OF HOT PRESSING CONDITIONS ON TECHNOLOGICAL PROPERTIES OF FLAKEBOARD
Kwon J. H., AYRILMIŞ N.
The 10th International Conference “WOOD SCIENCE AND ENGINEERING IN THE THIRD MILLENNIUM” ICWSE 2015 November 5-7, 2015 TRANSILVANIA University, Brasov, ROMANIA, Brasov, Romanya, 5 - 07 Kasım 2015, ss.803-807, (Tam Metin Bildiri)
2015
201522. Effect of heat-treatment of flakes on physical and mechanical properties of flakeboard
AYRILMIŞ N., Kwon J. H.
Inwood 2015: Innovations in wood materials and processes held by Mendel University, Bruno, Çek Cumhuriyeti, 19 - 22 Mayıs 2015, ss.1-4, (Tam Metin Bildiri)
2015
201523. Physical, mechanical, and thermal properties of wood plastic nanocomposites reinforced with multi walled carbon nanotubes
AYRILMIŞ N., KAYMAKCI A.
Inwood 2015: Innovations in wood materials and processes held by Mendel University, Bruno, Çek Cumhuriyeti, 19 - 22 Mayıs 2015, ss.1-9, (Tam Metin Bildiri)
2015
201524. ZEOLİT KULLANILARAK ÜRETİLEN AHŞAP POLİPROPİLEN KOMPOZİTLERİN KARAKTERİZASYONU
KAYMAKCI A., AKKUŞ M., AYRILMIŞ N., AKBULUT T.
3. MOBİLYA KONGRESİ, Konya, Türkiye, 10 - 12 Nisan 2015, ss.674-680, (Tam Metin Bildiri)
2015
201525. REÇİNE EMDİRİLMİŞ KÂĞIT ATIKLARI KULLANILARAK ÜRETİLEN AHŞAP POLİPROPİLEN KOMPOZİTLERİN KARAKTERİZASYONU
AKKUŞ M., KAYMAKCI A., AKBULUT T., AYRILMIŞ N.
3.ULUSAL MOBİLYA KONGRESİ, Konya, Türkiye, 10 - 12 Nisan 2015, ss.833-842, (Tam Metin Bildiri)
2014
201426. Mechanical Performance of Wood Plastic Composite Containing Decayed Wood
AYRILMIŞ N., KAYMAKCI A., GULEC T.
57th SWST International Convention 7th Wood Structure and Properties Conference, 6th European Hardwood Conference, Zvolen, Slovakya, 23 - 27 Temmuz 2014, ss.1-6, (Tam Metin Bildiri)
2014
201427. Effect of Microfi brillated Cellulose Content on the Bonding Performance of Urea-formaldehyde Resin.
AYRILMIŞ N., Kwon J. H., HAN T. H., Lee S.
57th SWST International Convention 7th Wood Structure and Properties Conference, 6th European Hardwood Conference, Zvolen, Slovakya, 23 - 27 Temmuz 2014, ss.683-0, (Tam Metin Bildiri)
2014
201428. Influence of Repeated Injection Molding on Some Physical and Mechanical Properties of Wood Polymer Composites
KAYMAKÇI A., AYRILMIŞ N.
10th Annual International Symposium on Environment, Atine, Yunanistan, 12 - 15 Mayıs 2014, ss.24, (Özet Bildiri)
2014
201429. Ahşap Polipropilen Kompozitlerin Üretiminde Mantar Meşesi (Quercus Suber-L) Kabuğunun Kullanılması
KAYMAKCI A., AS N., BEKTAS i., AYRILMIŞ N.
3. Uluslararası Odun Dışı Orman Ürünleri sempozyumu, Kahramanmaraş, Türkiye, 8 - 10 Mayıs 2014, ss.1016-1022, (Tam Metin Bildiri)
2013
201330. Some mechanical properties of wood polypropylene composites filled with carpenter wastes
KAYMAKCI A., AYRILMIŞ N., GÜLEÇ T., AKKILIÇ H.
International Caucasia Forestry Symposium, Artvin, Türkiye, 24 Ekim 2013 - 26 Ekim 2014, ss.920-923, (Tam Metin Bildiri)
2012
201231. Waste Paper Sludge as a Raw Material in Particleboard Manufacture
AKBULUT T., AYRILMIŞ N., ÖZDEN Ö., CANDAN Z., AVCI E.
7-TH Annual International Conference on Environment, Atina, Yunanistan, 14 - 17 Mayıs 2012, cilt.1, ss.23-24, (Tam Metin Bildiri)
2012
201232. High Performance Lignocellulosic/Thermoplastic Composite From Rice Husk and Aluminium Polyethylene of Used Beverage Carton
AYRILMIŞ N., AKBULUT T., MERTOĞLU ELMAS G., KAYMAKCI A.
7th. Annual International Symposium on Environment, Atina, Yunanistan, 14 - 17 Mayıs 2012, (Tam Metin Bildiri)
2011
201133. Recent activities in flame retardancy of wood-plastic composites at the forest products laboratory
White R. H., Stark N. M., Ayrilmis N.
22nd Annual Conference on Recent Advances in Flame Retardancy of Polymeric Materials 2011, Stamford, CT, Amerika Birleşik Devletleri, 23 - 25 Mayıs 2011, ss.341-353, (Tam Metin Bildiri)
2011
201134. Thermal Conductivity Coefficient as a Predictor of Wood Strength
KAYMAKCI A., AS N., AYRILMIŞ N., BEKTAS i.
17 th International Nondestructive Testing and Evaluation of Wood Symposium, Sopron, Macaristan, 14 - 16 Eylül 2011, cilt.2, ss.645, (Tam Metin Bildiri)
2011
201135. Evaluation of chestnut Shell flour in manufacture of environmentally friendly wood-based panel
AYRILMIŞ N., KAYMAKCI A.
The International Symposium on Recent Advances in Nanocellulose Preparation and Wood Utilization, Chuncheon, Güney Kore, 18 - 19 Ağustos 2011, ss.24-31, (Tam Metin Bildiri)
2011
201136. Enhancement of dimensional stability and mechanical properties of light medium density fiberboards by adding melamine impregnated waste paper
AYRILMIŞ N.
International Conference “Wood Science and Engineering in the Third Millennium, Brasov, Romanya, 25 - 28 Temmuz 2011, ss.303-308, (Tam Metin Bildiri)
2011
201137. Effect of fire retardant chemicals on combustion properties of LVL panels
AYRILMIŞ N., Atar M., DÜNDAR T., CANDAN Z.
65th International Convention, Portland, Amerika Birleşik Devletleri, 19 - 21 Temmuz 2011, ss.1-6, (Tam Metin Bildiri)
2011
201138. Wettability properties of heat-treated European Rowan (Sorbus Aucuparia) wood
AYRILMIŞ N., CANDAN Z., KORKUT S.
65th International Convention, Portland, Amerika Birleşik Devletleri, 19 - 21 Temmuz 2011, ss.1-5, (Tam Metin Bildiri)
2011
201139. Effect of boron and phosphate compounds on physical and mechanical properties of wood hdpe composites at different levels of coupling agent
AYRILMIŞ N., AKBULUT T., DÜNDAR T., DURMUŞ A., Mengeloğlu F.
5th. Asia-Europe Symposium on Processing and Properties of Reinforced Polymers, Dresden, Almanya, 29 Haziran - 01 Temmuz 2011, ss.1, (Tam Metin Bildiri)
2011
201140. Effect of Boron and Phosphate Compounds on Thermal and Fire Properties of Wood/HDPE Composites
AKBULUT T., AYRILMIŞ N., DÜNDAR T., DURMUŞ A., White R. H., TEKER M.
5 th Asia-european Symposium on Processing and Properties of Reinforced Polymers, Dresden, Almanya, 29 Mayıs - 01 Haziran 2011, (Tam Metin Bildiri)
2011
201141. Effect of Boron Compounds on Physical, Mechanical and Fire Properties of Injection Molded Wood Plastic Composites
AYRILMIŞ N., AKBULUT T., DÜNDAR T., White R. H., Mengeloğlu F., CANDAN Z., et al.
Proceedings of the 11th international conference on wood and biofiber plastic composites & nanotechnology in wood composites symposium, Madison, Amerika Birleşik Devletleri, 16 - 17 Mayıs 2011, (Özet Bildiri)
2010
201042. Flat-pressed wood plastic composite as an alternative to conventional wood-based panels
Ayrilmis N., Jarusombuti S.
2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, İtalya, 28 - 30 Haziran 2010, ss.1505-1516, (Tam Metin Bildiri)
2010
201043. Utilization of Waste Pine Cone in Manufacture of Wood Plastic Composite
DÜNDAR T., AYRILMIŞ N., Büyüksarı Ü.
Second International Conference on Sustainable Construction Materials and Technologies, Ancona, İtalya, 28 - 30 Haziran 2010, cilt.3, ss.1517-1528, (Tam Metin Bildiri)
2010
201044. Effect of sanding on surface characteristics of medium density fiberboard made from rhododendron wood.
AYRILMIŞ N., CANDAN Z., AKBULUT T., Balkız Ö. D.
Forest Products Society 64th International Convention, Madison, Amerika Birleşik Devletleri, 20 - 22 Haziran 2010, ss.1, (Özet Bildiri)
0
045. Decay and termite resistance of particleboard and MDF panels made from pinecones
KÖSE C., TERZİ E., Büyüksarı Ü., Avcı E., AYRILMIŞ N., KARTAL S. N., et al.
The International Research Group on Wood Protection 41stAnnual Meeting, Fransa, ss.1-9, (Tam Metin Bildiri)
2009
200946. Wettability of fire retardant treated laminated veneer lumber LVL manufactured from veneers dried at different temperatures
AYRILMIŞ N., DÜNDAR T., CANDAN Z., AKBULUT T.
63rd International Convention, Forest Products Society, Boise, Idaho, Amerika Birleşik Devletleri, 21 - 23 Haziran 2009, ss.23, (Tam Metin Bildiri)
2009
200947. Wettability characteristics of fire retardants treated LVL panels manufactured from veneer dried at different temperature.
AYRILMIŞ N., DÜNDAR T., CANDAN Z., AKBULUT T.
Forest Products Society 63rd International Convention, Id, Amerika Birleşik Devletleri, 21 - 23 Haziran 2009, ss.1, (Tam Metin Bildiri)
2009
200948. Properties of wood and wood based materials subjected to thermal treatments under various conditions
ÜNSAL Ö., BÜYÜKSARI Ü., AYRILMIŞ N., KORKUT S.
7th Edition of the International Conference “Wood Science and Engineering in the Third Millennium” – ICWSE 2009, Brasov, Romanya, 4 - 06 Haziran 2009, ss.1, (Tam Metin Bildiri)
2009
200949. Effect of Press pressure on Surface Roughness and wettability of Medium density Fiberboard:
AKBULUT T., AYRILMIŞ N., CANDAN Z., AVCI E.
COST E49 Processes and performance of Wood-based panels. Adding Value Through Physical Functionality, İstanbul, Türkiye, 28 - 29 Nisan 2009, ss.16-17, (Özet Bildiri)
2008
200850. Sorption properties of laminated veneer lumber lvl treated with various fire retardants and dried at different temperatures
DÜNDAR T., AYRILMIŞ N., CANDAN Z., Şahin H. T.
3. International Conference on Environmentally-Compatible Forest Products, Porto, Portekiz, 10 - 12 Eylül 2008, ss.285-288, (Tam Metin Bildiri)
2002
200251. Effect of Tree Species on the Technological Properties of MDF
AYRILMIŞ N., AKBULUT T.
Forest Products Society 56 th Annual Meeting, Madison, Amerika Birleşik Devletleri, 23 - 26 Haziran 2002, ss.1, (Tam Metin Bildiri)
1998
199852. Kızılçamlarda Çıralanmanın Odunun Fiziksel ve Mekanik Özellikleri Üzerine Etkisi
AS N., ALMA M. H., ÜNSAL Ö., GOKER Y., AYRILMIŞ N.
Cumhuriyetimizin 75. Yılında Ormancılığımız Sempozyumu, İstanbul, Türkiye, 21 - 23 Ekim 1998, ss.525-530, (Tam Metin Bildiri)
Kitaplar
2026
20261. Polyvinyl Chloride (PVC)-Based Biocomposites and Bionanocomposites: State-of-the-Art, New Challenges, and Opportunities
Panda S. K., Visakh P., AYRILMIŞ N.
Polyvinyl Chloride (PVC)-Based Biocomposites and Bionanocomposites, wiley, ss.1-27, 2026
2024
20242. YONGALEVHA ENDÜSTRİSİ - PARTICLEBOARD INDUSTRY
Akbulut T., Ayrılmış N.
IUC PRESS, İstanbul, 2024
2021
20213. Physical and Mechanical Properties of Biocomposites Based on Lignocellulosic Fibers
Ayrilmiş N., Rimdusit S., Nagarajan R., Devi M. I.
Mechanical and Dynamic Properties of Biocomposites, Senthilkumar Krishnasamy,Rajini Nagarajan,Senthil Muthu Kumar Thiagamani,Suchart Siengchin, Editör, John Wiley & Sons, West Sussex, UK , New York, ss.77-103, 2021
2021
20214. Analysis on Thermal Properties of Polyethylene–Vinyl Acetate (PEVA) Matrix with Polytetrafluroethylene (PTFE) Particle-Reinforced Composites
Kumar R. M., Rajini N., Mayandi K., Ayrılmış N., Srisuryadharan M., Venkatesh P., et al.
Advances in Materials and Manufacturing Engineering, Rajmohan T.,Palanikumar K.,Davim J.P., Editör, Springer, London/Berlin , Singapore, ss.187-193, 2021
2021
20215. Mechanical, Thermal, Tribological, and Dielectric Properties of Biobased Composites
Kumar T. S. M., K. Senthilkumar ., Chandrasekar M., Karthikeyan ., Ayrılmış N., Nagarajan R., et al.
Biobased Composites: Processing, Characterization, Properties, and Applications, Anish Khan Sanjay M. Rangappa Suchart Siengchin Abdullah M. Asiri, Editör, John Wiley & Sons, West Sussex, UK , New York, ss.53-73, 2021
2021
20216. Utilization of Bamboo Fibres and Their Influence on the Mechanical and Thermal Properties of Polymer Composites
Kumar T. S. M., Chandrasekar M., Kumar K. S. M., Ayrılmış N., Sıengchın S., Nagarajan R.
Bamboo Fiber Composites, T. Senthil Muthu Kumar,M. Chandrasekar,K. Senthilkumar,Suchart Siengchin,N. Rajini, Editör, Springer-Verlag , Singapore, ss.81-96, 2021
2019
20197. Recent studies on durability of natural/synthetic fiber reinforced hybrid polymer composites
Nagarajan R., Manojprabhakar M., Siengchin S., Ayrılmış N.
Recent studies on durability of natural/synthetic fiber reinforced hybrid polymer composites, Mohammad Jawaid Mohamed Thariq Naheed Saba, Editör, Woodhead Publishing Limited , Swansea, ss.1-13, 2019
2016
20168. Properties and utilization of plant-fibers and nanocellulose for composite materials
Ayrılmış N., Ashori A. R., Kwon J. H.
Polyethylene Based Biocomposites and Bionanocomposites, Visakh P.M.,Lutfi S., Editör, John Wiley & Sons, West Sussex, Uk Wiley & Sons, West Sussex, Uk, Suffolk, ss.405-428, 2016
2015
20159. Alternative Solutions for Reinforcement of Thermoplastic Composites
Ayrılmış N., Ashori A.
Natural Fiber Composites, Campilho R.D.S.G., Editör, Crc Press Taylor, New York, ss.65-88, 2015
Desteklenen Projeler
2019 - 2021
2019 - 2021
Use of natural fiber reinforced bio-plastic filaments for 3D printers as alternative to petroleum-based plastic filaments
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2019 - 2020
2019 - 2020Çeşitli yanmayı geciktirici kimyasalların yönlendirilmiş yongalevhanın yanma ve teknolojik özelikleri üzerine etkisi
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2018 - 2019
2018 - 2019Recent Studies in Flame Retardancy of Wood Plastic Composites
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2018 - 2019
2018 - 2019Use of wood in 3D printing technology - Case Studies
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü), KUZMAN M. K., SERNEK M., KARIZ M.
2018 - 2018
2018 - 2018Technological properties of oriented strandboard bonded with phenolformaldehyde resin synthesized with bio oil from thermal and catalytic pyrolysis methods
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü), ÖZBAY G.
2017 - 2018
2017 - 2018Kayın Ahşap Sandalyelerde Birleşim Yeri Mekanik Performans Testleri
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü), DÜNDAR T., AS N., ŞENDAĞ A.
2017 - 2017
2017 - 2017Technological properties of fibreboard produced with thermoseeting resins modified with condensate generated during kiln drying step of wood
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü), KAPTI T.
2015 - 2017
2015 - 2017Odun unu ve geri donusum plastik kullanarak çevreyle dost 3D yazıcı hammaddesi üretimi
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2015 - 2017
2015 - 2017Mobilya endüstrisi için orta tabakası kaba liften ve yüzeyleri kaliteli ince liften oluşan katmanlı MDF üretimi
TÜBİTAK Projesi , 1001 - Bilimsel ve Teknolojik Araştırma Projelerini Destekleme Programı
Akbulut T., Ayrılmış N. (Yürütücü)
2013 - 2017
2013 - 2017Effect of Tree Species and Defibrator Conditions on Surface Properties of Medium Density Fiberboard Using a Novel Technology
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2016 - 2016
2016 - 2016Effect of the Marbel Powder and Wood Powder Content on the Technological Properties of Thermoplastic Composites
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
DÜNDAR T. (Yürütücü), AYRILMIŞ N., AKKUŞ M.
2016 - 2016
2016 - 2016Mechanical Properties of Wood Polypropylene Composite Produced By Using Resin Impmregnated Paper Waste
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AKBULUT T. (Yürütücü), AYRILMIŞ N., AKKUŞ M.
2016 - 2016
2016 - 2016Surface properties of wood plastic composites painted with water and solvent based paints
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü), AKKUŞ M., AKBULUT T.
2015 - 2016
2015 - 2016Physical, mechanical, and thermal properties of wood plastic nanocompo-sites reinforced with multi walled carbon nanotubes
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2014 - 2016
2014 - 2016Hızlı gelişen tür ağaçlardırmalarında odun kalitesinin tahribatsıız muayene yöntemleri ile belirlenmesi
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü), DÜNDAR T., AS N., KAYMAKCI A.
2013 - 2015
2013 - 2015Reduction of formaldehyde emission from light MDF panels by adding chestnut shell flour
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2012 - 2015
2012 - 2015NANO BOYUTLARDA BOR NİTRÜR, BOR KARBÜR, ve KARBON NANATÜP İLE TAKVİYE EDİLMİŞ YÜKSEK PERFORMANSLI YAPISAL AHSAP PLASTİK KOMPOZİT ÜRETİMİ
Yükseköğretim Kurumları Destekli Proje , BAP Araştırma Projesi
AYRILMIŞ N. (Yürütücü)
2014 - 2014
2014 - 2014Mechanical performance of wood plastic composites containing decayed wood
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2013 - 2013
2013 - 2013Effect of Outdoor Storage of Wood Chip Pile on the Physical and Mechanical Properties of High Density Fiberboard
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2012 - 2013
2012 - 2013Effect of fire retardants on surface roughness and wettability of wood plastic composites
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2012 - 2012
2012 - 2012Enhancement of dimensional stability and mechanical properties of light MDF by adding melamine resin impregnated paper waste
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2012 - 2012
2012 - 2012High Performance Lignocellulosic/Thermoplastic Composite From Rice Husk and Aluminium Polyethylene of Used Beverage Carton
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2010 - 2012
2010 - 2012YÜKSEK BASINÇ LAMİNATLARINDA (HPL) ÇEŞİTLİ KULLANIM ÖZELLİKLERİNİN KARŞILAŞTIRILMASI, KALİTE PROBLEMLERİ VE ÇÖZÜM ÖNERİLERİ
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2011 - 2011
2011 - 2011Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2011 - 2011
2011 - 2011Effect of Boron and Phosphate Compounds on Physical and Mechanical Properties of wood/HDPE Composites at Different Lelevels of Coupling Agent
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2010 - 2011
2010 - 2011Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2008 - 2011
2008 - 2011Yanmayı Geciktirici Kimyasalların Odun Plastik Kompozitlerinin Fiziksel, Mekanik, Yanma ve Termal Degredasyonu Üzerine Etkilerinin Araştırılması
Yükseköğretim Kurumları Destekli Proje , BAP Araştırma Projesi
AYRILMIŞ N. (Yürütücü)
2010 - 2010
2010 - 2010Utilization of pine (Pinus pinea L.) cone in manufacture of wood based composite
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2010 - 2010
2010 - 2010Utilization of waste tire rubber in manufacture of oriented strandboard
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2009 - 2010
2009 - 2010Flat-Pressed Wood Plastic Composite Panels as an Alternative to Conventional Wood Based Panels
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2009 - 2010
2009 - 2010Effects of Post Heat-Treatment on Surface Characteristics and Adhesive Bonding Performance of Medium Density Fiberboard
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2008 - 2010
2008 - 2010Basınç Odunu Liflerinden Yapılan MDF Levhalarında Boyutsal Stabilizasyonun İncelenmesi
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2007 - 2010
2007 - 2010Effect of panel density on dimensional stability of medium
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2007 - 2010
2007 - 2010Physical,mechanical, and fire properties of oriented strandboard with fire retardant treated veneers
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2008 - 2009
2008 - 2009Utilization of Waste Tire Rubber in Manufacture of Particleboard
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
2008 - 2008
2008 - 2008EFFECTS OF POST THERMAL-TREATMENT ON WETTABILITY, SURFACE ROUGHNESS, AND ADHESIVE BONDING PERFORMANCE OF EXTERIOR MEDIUM DENSITY FIBERBOARD
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
AYRILMIŞ N. (Yürütücü)
Bilimsel Dergilerdeki Faaliyetler
2013 - Devam Ediyor
2013 - Devam Ediyor
Turkish Journal of Agriculture nd Foresty
Yayın Kurul Üyesi
2013 - Devam Ediyor
2013 - Devam EdiyorLignocellulose
Yayın Kurul Üyesi
2012 - Devam Ediyor
2012 - Devam EdiyorJournal of Materials Science Research
Editör
2012 - Devam Ediyor
2012 - Devam Ediyor
Journal of Forest Science Kangwon National University
Editör
Bilimsel Yayınlarda Hakemlikler
Şubat 2013
Şubat 2013Composites Part B Engineering
Hakemli Bilimsel Dergi
Bilimsel Danışmanlıklar
2015 - 2015
2015 - 2015Diğer
Polisan Kimya A.Ş.
İstanbul Üniversitesi, Orman Fakültesi, Orman Endüstri Mühendisliği, Türkiye
Kongre ve Sempozyum Katılımı Faaliyetleri
01 Kasım 2015 - 01 Kasım 2015
01 Kasım 2015 - 01 Kasım 2015Utilization of tinder fungus as filler in manufacture of HDPE composites
Katılımcı
-Romanya
01 Kasım 2015 - 01 Kasım 2015
01 Kasım 2015 - 01 Kasım 2015Catalytic heat treatment of wood
Katılımcı
Brasov-Romanya
01 Mayıs 2015 - 01 Mayıs 2015
01 Mayıs 2015 - 01 Mayıs 2015Effect of heat-treatment of flakes on physical and mechanical properties of flakeboard.
Katılımcı
-Çek Cumhuriyeti
01 Mayıs 2015 - 01 Mayıs 2015
01 Mayıs 2015 - 01 Mayıs 2015Physical, mechanical, and thermal properties of wood plastic nanocomposites reinforced with multi walled carbon nanotubes.
Katılımcı
Brno-Çek Cumhuriyeti
01 Mayıs 2012 - 01 Mayıs 2012
01 Mayıs 2012 - 01 Mayıs 2012High performance lignocellulosic/thermoplastic composite from rice husk and aluminium polyethylene of used beverage carton
Katılımcı
Atina-Yunanistan
01 Haziran 2011 - 01 Haziran 2011
01 Haziran 2011 - 01 Haziran 2011