Effect of heat treatment on mechanical properties of selected wood joints

Kuzman M. K., Kutnar A., Ayrilmis N., Kariz M.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, cilt.73, sa.5, ss.689-691, 2015 (SCI-Expanded, Scopus) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 73 Sayı: 5
  • Basım Tarihi: 2015
  • Doi Numarası: 10.1007/s00107-015-0931-z
  • Dergi Adı: EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.689-691
  • İstanbul Üniversitesi-Cerrahpaşa Adresli: Hayır

Özet

Effect of heat treatment on the mechanical properties of box and frame-type corner joints produced from modified and non-modified beech (Fagus sylvatica L.) and spruce (Picea abies L.) wood was investigated. The wood lamellas were heat-treated at 190 and 210 A degrees C for 3 h in a treatment process with initial vacuum. Samples of box- and frame-type corner joints used in the production of furniture were prepared from the heat-modified and non-modified lamellas using dowels and biscuits. The dowel joints had higher failure load than the biscuit joints.