Isolation of naproxen from wastewater using carbon-based magnetic adsorbents
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, cilt.12, sa.11, ss.3541-3550, 2015 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 12 Sayı: 11
- Basım Tarihi: 2015
- Doi Numarası: 10.1007/s13762-015-0775-4
- Dergi Adı: INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
- Sayfa Sayıları: ss.3541-3550
- Anahtar Kelimeler: Drug, Adsorption, Magnetic separation, Carbon nanotubes, Activated carbon, ACTIVATED CARBON, FE3O4 NANOPARTICLES, ADSORPTIVE REMOVAL, PHARMACEUTICAL COMPOUNDS, EMERGING CONTAMINANTS, AQUEOUS-SOLUTION, CLOFIBRIC ACID, NANOTUBES, COMPOSITE, OXIDE
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- İstanbul Üniversitesi-Cerrahpaşa Adresli: Hayır
Özet
Naproxen is one of the mostly used drugs worldwide and is most abundant in wastewater. This study aims to adsorb naproxen from wastewater using magnetically modified carbon-based adsorbents. These adsorbents have very large specific area for naproxen adsorption, and magnetite modification provides easy separation and regeneration. The co-precipitation method was used for magnetic modification. Adsorption process was carried out in batches. The effect of adsorption variables was investigated. Langmuir, Freundlich, and Dubinin-Radushkevich isotherms were applied to the equilibrium data. The maximum adsorption capacities of adsorbents from Langmuir isotherm were found as 20.75 mg/g for magnetic multi-wall carbon nanotubes and 87.79 mg/g for magnetic activated carbon. Pseudo-first-order kinetic model, pseudo-second-order kinetic model, intra-particle diffusion model, and Bangham model were used for determination of adsorption mechanisms. The rate-limiting step is electron exchange between the adsorbent and adsorbate. Both film diffusion and intra-particle diffusion occur while the adsorption process. Delta GA degrees, Delta SA degrees, and Delta HA degrees were calculated for the process.