Comparative effects of bubble tea and black tea on the color stability of nanofilled and microhybrid composite resins over time
ANATOLIAN CLINIC JOURNAL OF MEDICAL SCIENCES, cilt.31, sa.2, ss.330-339, 2026 (TRDizin)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 31 Sayı: 2
- Basım Tarihi: 2026
- Doi Numarası: 10.21673/anadoluklin.1862979
- Dergi Adı: ANATOLIAN CLINIC JOURNAL OF MEDICAL SCIENCES
- Derginin Tarandığı İndeksler: Central & Eastern European Academic Source (CEEAS), TR DİZİN (ULAKBİM)
- Sayfa Sayıları: ss.330-339
- İstanbul Üniversitesi-Cerrahpaşa Adresli: Evet
Özet
Aim: This study evaluates the effect of bubble tea and black tea on the color stability of composite resins.Methods: Composite resin specimens (6×2 mm) [Enamel Plus HRi (HRi), Filtek Universal Restorative (FU),
and G-ænial Anterior (GC)] were prepared (n = 90). A spectrophotometer was used to record baseline color
values. The specimens in each composite resin group were randomly divided into three subgroups and submerged in bubble tea, black tea, and, as a control, distilled water (n = 10). Color measurements were conducted at three time points: a baseline before immersion (t0), after 24 hours (t1), and 28 days (t2) of storage
in different immersion media. The color change (ΔE00) values for the specimens were computed using the
CIEDE2000 color difference equation. The ΔE00 values were assessed based on the 50/50% perceptibility
and acceptability thresholds. Data were analyzed using two-way ANOVA and Tukey HSD test for pairwise
comparisons (p < 0.05).Results: Both bubble tea and black tea caused color changes exceeding the acceptability threshold in all
composite materials at 24 hours and 28 days. The ΔE00 values of all composites increased significantly between these two time points (p < 0.001). No significant differences were observed among the composites
in ΔE00 values over 24 hours (p > 0.05). After 28 days in black tea, FU exhibited significantly higher ΔE00
values compared to GC and HRi (p < 0.05). In contrast, HRi demonstrated significantly lower discoloration
than FU and GC following 28 days of immersion in bubble tea (p < 0.05).Conclusion: Bubble tea and black tea induced discoloration above the acceptable threshold in the tested
composite materials. Prolonged immersion time increased the color change in all materials. Although shortterm immersion revealed no material-dependent differences, long-term color stability differed depending on
the composite resin and the immersion medium employed.Keywords: Color; composite dental resin; teaÖZ
Amaç: Bu çalışmanın amacı, bubble tea ve siyah çayın farklı kompozit rezinlerin renk stabilitesi üzerindeki
etkisini değerlendirmektir.Yöntemler: Enamel Plus HRi (HRi), Filtek Universal Restorative (FU) ve G-ænial Anterior (GC) kompozit rezinlerinden disk şeklinde (6 × 2 mm) örnekler hazırlanmıştır (n = 90). Başlangıç renk ölçümleri bir spektrofotometre kullanılarak yapılmıştır Her kompozit grubu bubble tea, siyah çay ve kontrol grubu olarak distile suda
bekletilmek üzere rastgele üç alt gruba ayrılmıştır (n = 10). Renk ölçümleri, bekletme öncesinde (t0), 24 saat
sonra (t1) ve 28 gün sonra (t2) spektrofotometre kullanılarak gerçekleştirilmiştir. Renk değişimi (ΔE00) değerleri CIEDE2000 renk farkı formülü kullanılarak hesaplanmış ve %50/50 algılanabilirlik ile kabul edilebilirlik
eşiklerine gore değerlendirilmiştir. Veriler two-way ANOVA ve Tukey HSD testleri kullanılarak analiz edilmiştir
(p < 0,05).Bulgular: Bubble tea ve siyah çay, tüm kompozit materyallerde hem 24 saat hem de 28 günlük değerlendirme
sürelerinde kabul edilebilirlik eşiğinin üzerinde renk değişimine neden olmuştur. Tüm kompozitlerde ΔE00
değerleri zamanla anlamlı şekilde artmıştır (p < 0,001). 24 saatlik bekleme periyodunda kompozitlerin ΔE00
arasında anlamlı bir fark gözlenmemiştir (p > 0,05). 28 gün sonunda siyah çayda bekletilen ornekler arasında
FU’nun ΔE00 değeri, GC ve HRi’ye kıyasla anlamlı derecede daha yüksek bulunmuştur (p < 0,05). Ayrıca,
bubble tea icinde 28 gun bekletilen HRi örneklerinin ΔE00 değerleri, FU ve GC’ye gore anlamlı düzeyde daha
duşük olarak saptanmıştır (p < 0,05).Sonuç: Bubble tea ve siyah çay, incelenen kompozit rezinlerde klinik olarak kabul edilemez düzeyde renklenmeye yol açmıştır. Solüsyonlarda bekletme süresinin uzaması, tüm materyallerde renk değişimini artırmıştır.
Kısa süreli bekletmelerde materyaller arasında fark gözlenmezken, uzun süreli maruziyet sonucu meydana
gelen renk değişimi kullanılan kompozit türüne ve bekletme ortamına bağlı olarak farklılık göstermiştir.