A thermochemical approach for the determination of convection heat transfer coefficients in a gun barrel

Değirmenci E., Dirikolu M.

APPLIED THERMAL ENGINEERING, cilt.37, ss.275-279, 2012 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 37
  • Basım Tarihi: 2012
  • Doi Numarası: 10.1016/j.applthermaleng.2011.11.029
  • Dergi Adı: APPLIED THERMAL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.275-279
  • Anahtar Kelimeler: Gun barrel, Heat convection, Thermo-mechanical, Thermochemical
  • İstanbul Üniversitesi-Cerrahpaşa Adresli: Hayır

Özet

A finite element thermo-mechanical analysis of firing through a gun barrel requires the convection heat transfer coefficient values under high temperature and pressure among input parameters. A thermochemical approach has been formulated in order to obtain these coefficients. Considering a variable burning speed for a typical gunpowder configuration, the variation of pressure wave speed, density, and heat conduction of the burning gas mixture is used to evaluate the Reynolds and Prandtl numbers along the barrel axis. These two numbers are then used to calculate the Nusselt numbers from which the continuously changing convection heat transfer coefficients are determined. It is confirmed from an experimental firing process and its corresponding thermo-mechanical finite element analysis that the calculated coefficients present a good estimate of the real coefficients. (C) 2011 Elsevier Ltd. All rights reserved.

 

Abstract

A finite element thermo-mechanical analysis of firing through a gun barrel requires the convection heat transfer coefficient values under high temperature and pressure among input parameters. A thermochemical approach has been formulated in order to obtain these coefficients. Considering a variable burning speed for a typical gunpowder configuration, the variation of pressure wave speed, density, and heat conduction of the burning gas mixture is used to evaluate the Reynolds and Prandtl numbers along the barrel axis. These two numbers are then used to calculate the Nusselt numbers from which the continuously changing convection heat transfer coefficients are determined. It is confirmed from an experimental firing process and its corresponding thermo-mechanical finite element analysis that the calculated coefficients present a good estimate of the real coefficients.

Full-size image (19 K)