Determination of Wood Cutting Parameters Using Taguchi Method

---

Hazır E., Koç K. H.

International Journal Of Scientific Research Engineering&Technology(IJSRET), cilt.5, ss.524-528, 2016 (Hakemli Dergi)

• Yayın Türü: Makale / Tam Makale
• Cilt numarası: 5
• Basım Tarihi: 2016
• Dergi Adı: International Journal Of Scientific Research Engineering&Technology(IJSRET)
• Sayfa Sayıları: ss.524-528
• Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
• İstanbul Üniversitesi-Cerrahpaşa Adresli: Evet

Özet

The determination of machining conditions for wood surface roughnesswas a crucial index in furniture industry.In this

work,Taguchi method was used to determine the effective of CNC cutting parameters such as spindle speed, feed rate

and depth of cuton arithmetic average roughness ( a R ). Average surface roughness (��) values of the specimens of

beech were measured using a stylus type equipment.An orthogonal array and analysis of variance (ANOVA) were

conductedto investigate the machining factors.According to the results, the surface roughness decreased with the

increase of spindle speed and decrease with the feed rate.The minimum surface roughnesswas obtained with spindle

speed of 15000 rpm, feed rate of 2 m/min and depth of cut of 1mm.