Yayınlar & Eserler

Yayın Ağı
Makaleler 16
Tümü (16)
SCI-E, SSCI, AHCI (14)
SCI-E, SSCI, AHCI, ESCI (15)
ESCI (1)
Scopus (15)
Diğer Yayınlar (1)

1. Evaluation of the electrochemical corrosion behavior of anodic aluminum oxide produced by the two-step anodization process

Yilmaz B., Hapçı Ağaoğlu G., Yuksel B., Orhan G.
Anti-Corrosion Methods and Materials , cilt.67, sa.5, ss.509-518, 2020 (SCI-Expanded, Scopus) identifier identifier

2. Investigation of time-dependent corrosion behavior of Sr-modified AlSi12 alloy

Duygun I. K., Hapçı Ağaoğlu G., Orhan G.
International Journal of Materials Research , cilt.111, sa.4, ss.339-346, 2020 (SCI-Expanded, Scopus) identifier identifier

3. Time-dependent corrosion properties of Sr-modified AlSi9 alloy analyzed by electrochemical techniques

Duygun I. K., Hapçı Ağaoğlu G., Dışpınar D., Orhan G.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.803, ss.786-794, 2019 (SCI-Expanded, Scopus) identifier identifier

4. Electrochemical Deposition and Characterization of Ni and NiCu Coatings for Hydrogen Evolution Reaction

Oztop O., Hapçı Ağaoğlu G., Orhan G.
SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY , cilt.55, ss.410-417, 2019 (ESCI, Scopus) identifier identifier

5. Production and mechanical characterization of Ni-coated carbon fibers reinforced Al-6063 alloy matrix composites

Alten A., Erzi E., Gursoy O., Hapçı Ağaoğlu G., Dışpınar D., Orhan G.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.787, ss.543-550, 2019 (SCI-Expanded, Scopus) identifier identifier

6. Corrosion Behavior of B and Ti Grain-Refined Sr-Modified A356

Ozturk I., Hapçı Ağaoğlu G., Erzi E., Dışpınar D., Orhan G.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.27, ss.5197-5204, 2018 (SCI-Expanded, Scopus) identifier identifier

7. Effects of strontium addition on the microstructure and corrosion behavior of A356 aluminum alloy

Ozturk I., Hapçı Ağaoğlu G., Erzi E., Dışpınar D., Orhan G.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.763, ss.384-391, 2018 (SCI-Expanded, Scopus) identifier identifier

8. Production and electrochemical characterization of Mg-Ni alloys by molten salt electrolysis for Ni-MH batteries

Agaoglu G., Orhan G.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.43, ss.6266-6274, 2018 (SCI-Expanded, Scopus) identifier identifier

9. Elaboration and electrochemical characterization of Mg-Ni hydrogen storage alloy electrodes for Ni/MH batteries

Agaoglu G., Orhan G.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.42, ss.8098-8108, 2017 (SCI-Expanded, Scopus) identifier identifier

10. Effect of electrolysis parameters of Ni-Mo alloy on the electrocatalytic activity for hydrogen evaluation and their stability in alkali medium

Manazoglu M., Hapci G., Orhan G.
JOURNAL OF APPLIED ELECTROCHEMISTRY , cilt.46, ss.191-204, 2016 (SCI-Expanded, Scopus) identifier identifier

11. Electrochemical Deposition and Characterization of Ni-Mo Alloys as Cathode for Alkaline Water Electrolysis

Manazoglu M., Hapci G., Orhan G.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.25, sa.1, ss.130-137, 2016 (SCI-Expanded, Scopus) identifier identifier

12. Properties of Ni/Nano-TiO2 Composite Coatings Prepared by Direct and Pulse Current Electroplating

Yilmaz G., Hapci G., Orhan G.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.24, sa.2, ss.709-720, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

13. Electrodeposited Ni/SiC nanocomposite coatings and evaluation of wear and corrosion properties

Ozkan S., Hapci G., Orhan G., Kazmanli K.
SURFACE & COATINGS TECHNOLOGY , cilt.232, ss.734-741, 2013 (SCI-Expanded, Scopus) identifier identifier

14. Application of Response Surface Methodology (RSM) to Evaluate the Influence of Deposition Parameters on the Electrolytic Cu-Zn Alloy Powder

Orhan G., Hapci G., Keleş Ö.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE , cilt.6, sa.9, ss.3966-3981, 2011 (SCI-Expanded, Scopus) identifier identifier

15. Effect of electrolysis parameters on the morphologies of copper powder obtained in a rotating cylinder electrode cell

Orhan G., Hapci G.
POWDER TECHNOLOGY , cilt.201, sa.1, ss.57-63, 2010 (SCI-Expanded, Scopus) identifier identifier

16. İstatistiksel Proses Kontrol

HAPÇI G., KAHRUMAN C.
T.C. ABMYO Dergisi , cilt.7, ss.39-51, 2007 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 31

1. RECOVERY OF END-OF-LIFE LITHIUM-ION BATTERY CATHODE MATERIALS IN ACIDIC MEDIA

Güloğlu E., Zorağa M., Hapçı Ağaoğlu G., Kaplan Ş. S., Sönmez M. Ş., Gürmen S., et al.
21st International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.121, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

2. Corrosion Behaviour of Sr Modified A360 Alloys

Duygun İ. K., HAPÇI AĞAOĞLU G., DIŞPINAR D., ORHAN G.
19th International Metallurgy and Materials Congress (IMMC 2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1-7, (Tam Metin Bildiri)

3. Mechanical Properties of Carbon Fiber-reinforced 6063 Al Alloy

Alten A., Gürsoy Ö., Hapçı Ağaoğlu G., Erzi E., Dışpınar D., Orhan G.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.201-203, (Tam Metin Bildiri)

4. Surface Modification of Ti6Al4V Type Dental Alloy in Acidic Medium

Erdem G., Gürsoy Ö., Bulutsuz A. G., Mercan Ç., Tan E., Katiboğlu A. B., et al.
1 st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.193-194, (Tam Metin Bildiri)

5. Continuous Casted Aluminum Flat Products Corrosion Characteristic According to Downstream Process

İpek S. K., Ulus A., Ekici H., Ağaoğlu G., Orhan G.
International symposium on Light Metals, 2018, Arizona, Amerika Birleşik Devletleri, 11 - 15 Mart 2018, ss.943-952, (Tam Metin Bildiri) identifier identifier

6. Electrochemical Deposition and Characterization of NiCu Coatings for Hydrogen Evolution Reaction

Öztop Ö., Hapçı Ağaoğlu G., Orhan G.
International Materials Technologies and Metallurgy Conference (MTM) 2017, İstanbul, Türkiye, 26 - 27 Ekim 2017, ss.133-135, (Tam Metin Bildiri)

7. Deposition of Electroless NiP and NiPCo Coatings on Stainless Steel and Their Corrosion Behavior

KIR E. S., HAPÇI AĞAOĞLU G., ORHAN G.
International Materials Technologies and Metallurgy Conference (MTM) 2017, İstanbul, Türkiye, 26 - 27 Ekim 2017, ss.251-253, (Tam Metin Bildiri)

8. Deposition and Characterization of Electroless Ni-P and Ni-W-P Coatings on Stainless Steel

ARAS B., HAPÇI AĞAOĞLU G., ORHAN G.
International Materials Technologies and Metallurgy Conference (MTM) 2017, İstanbul, Türkiye, 26 - 27 Ekim 2017, ss.247-248, (Tam Metin Bildiri)

9. Akımsız Ni kaplı karbon fiber takviyeli Al kompozit üretimi ve karakterizasyonu

Alten A., Gürsoy Ö., ERZİ E., HAPÇI AĞAOĞLU G., DIŞPINAR D., ORHAN G.
9. Ulusal Döküm Kongresi, Eskişehir, Türkiye, 20 - 21 Ekim 2017, ss.271-280, (Tam Metin Bildiri)

10. KARBON FİBER TAKVİYELİ 6063 Al KOMPOZİT ÜRETİMİ

Alten A., Gürsoy Ö., ERZİ E., HAPÇI AĞAOĞLU G., DIŞPINAR D., ORHAN G.
8. Alüminyum Sempozyumu, İstanbul, Türkiye, 5 - 06 Ekim 2017, ss.36-40, (Tam Metin Bildiri)

11. 2024 Al ALAŞIMLARINDA KATILAŞMA HIZININ MEKANİK ve KOROZYON ÖZELLİKLERİNE ETKİSİ

Güneş Z., HAPÇI AĞAOĞLU G., DIŞPINAR D., ORHAN G.
8. Alüminyum Sempozyumu, İstanbul, Türkiye, 5 - 06 Ekim 2017, ss.1, (Tam Metin Bildiri)

12. SÜREKLİ DÖKÜM VE SOĞUK HADDELEME ROTASI SONRASI TAVLAMA SICAKLIĞININ KOROZYON ÖZELLİKLERİ ÜZERİNE ETKİSİ

İpek S. K., Ulus A., HAPÇI AĞAOĞLU G., ORHAN G.
8. Alüminyum Sempozyumu, İstanbul, Türkiye, 5 - 06 Ekim 2017, ss.113-117, (Tam Metin Bildiri)

13. A356 Alalşımında Katılaşma Hızı ve Sr Modifikasyonunun Mikroyapı ve Korozyon Davranışına Etkisi

Öztürk İ., HAPÇI AĞAOĞLU G., DIŞPINAR D., ORHAN G.
8. Alüminyum Sempozyumu, İstanbul, Türkiye, 5 - 06 Ekim 2017, ss.64-67, (Tam Metin Bildiri)

14. Effect of bath composition for Ni-P coatings on carbon fibres

Alten A., HAPÇI AĞAOĞLU G., ERZİ E., DIŞPINAR D., ORHAN G.
EUROMAT 2017 Congress / European Congress and Exhibition on Advanced Materials and Processes, Selanik, Yunanistan, 17 - 22 Eylül 2017, cilt.C1, ss.35, (Özet Bildiri)

15. Electrodeposition of Amorphous/Nanocrystalline Ni–Mo Alloy For Hydrogen Evolution Reaction

Manazoğlu M., Hapçı Ağaoğlu G., Orhan G.
EUROMAT 2017 Congress / European Congress and Exhibition on Advanced Materials and Processes, Thessaloniki, Yunanistan, 17 - 22 Eylül 2017, cilt.E1, ss.14, (Özet Bildiri)

16. Effect of Sr addition on microstructure and corrosion behavior of A356 aluminum alloys

Öztürk İ., Hapçı Ağaoğlu G., Dışpınar D., Orhan G.
EUROMAT 2017 Congress / European Congress and Exhibition on Advanced Materials and Processes, Thessaloniki, Yunanistan, 17 - 22 Eylül 2017, ss.1, (Özet Bildiri)

17. Production of carbon fibers reinforced Al-alloy matrix composites

Alten A., HAPÇI AĞAOĞLU G., ERZİ E., DIŞPINAR D., ORHAN G.
EUROMAT 2017 Congress / European Congress and Exhibition on Advanced Materials and Processes, Selanik, Yunanistan, 17 - 22 Eylül 2017, cilt.C8, ss.13, (Özet Bildiri)

18. An Electrochemical Investigation of Mg-Ni Hydrogen Storage Alloys by Mechanical Alloying

Agaoglu G., Orhan G.
Symposium on Magnesium Technology / In-Situ Methods for Unraveling Structure-Property Relationships in Light Metals Symposium held during the 146th TMS Annual Meeting and Exhibition, California, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017, ss.375-380, (Tam Metin Bildiri) identifier identifier

19. The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System

Agaoglu G., Orhan G.
146th TMS Annual Meeting and Exhibition / Symposium on Mechanical and Creep Behavior of Advanced Materials - A Structural-Materials-Division Symposium Honoring Prof. K. Linga Murty, California, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017, ss.657-663, (Tam Metin Bildiri) identifier identifier

20. Recovery of Copper Powder from Wastewater by Rotating Cylinder Electrode (RCE) Method

Sert M., HAPÇI AĞAOĞLU G., ORHAN G.
18th International Metallurgy and Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.375-379, (Tam Metin Bildiri)

21. Ni/TiO2 Nanocomposite Coating Prepared by Direct and Pulse Current Methods

Yilmaz G., HAPÇI AĞAOĞLU G., ORHAN G.
18th International Metallurgy and Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.848-851, (Tam Metin Bildiri)

22. The Effect of Ball Milling Time on Discharge Behaviour of Mg2Ni-Type Hydrogen Storage Alloy Electrodes

HAPÇI AĞAOĞLU G., ORHAN G.
18th International Metallurgy and Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.762-765, (Tam Metin Bildiri)

23. The Effect of Cathode Rotation Speed on the Morphology of Copper Powders in RCE Cell

HAPÇI G., ORHAN G.
16th Metallurgy&Materials Congress, İstanbul, Türkiye, 1 - 04 Eylül 2012, ss.791-796, (Tam Metin Bildiri)

24. The Effect of Bath Composition on the Electrodeposition of Ni-Mo Alloy for Hydrogen Evolutıon Reaction (HER

Manazoğlu M., HAPÇI G., ORHAN G.
16th Metallurgy&Materials Congress, Türkiye, 1 - 04 Eylül 2012, ss.529-534, (Tam Metin Bildiri)

25. The Effect of TiO2 Concentration on the Corrosion Behaviour of Ni-TiO2 Composite Coatings

Yılmaz G., HAPÇI G., ORHAN G.
16th Metallurgy&Materials Congress,, Türkiye, 1 - 04 Eylül 2012, ss.535-540, (Tam Metin Bildiri)

26. Elektrolitik Kaplama Yöntemiyle Üretilen Ni-SiC Kompozitlerinin Korozyon Davranışı

Özkan S., HAPÇI G., ORHAN G.
1.Uluslararası Yüzey İşlemleri Sempozyumu, Türkiye, 1 - 04 Ağustos 2011, ss.1008-1015, (Tam Metin Bildiri)

27. Corrosion Behavior of Electrodepositited Ni-SiC Composite Coatings

Özkan S., HAPÇI G., ORHAN G.
1th ISTS, Türkiye, 1 - 04 Haziran 2011, ss.1008-1015, (Tam Metin Bildiri)

28. Elektroliz Parametrelerinin Cu-Zn Alaşım Tozlarının Görünür Yoğunluğu ve Mikroyapısı Üzerine Etkisi

HAPÇI G., ORHAN G.
15th International Metallurgy and Materials Congres, Türkiye, 1 - 04 Kasım 2010, ss.1418-1425, (Tam Metin Bildiri)

29. The Effect of Current Density and Temperature on Copper Powder Recovery by Electrolysis

HAPÇI G., ORHAN G.
7th International Copper Congress, Almanya, 1 - 04 Haziran 2010, cilt.I, ss.409-412, (Tam Metin Bildiri)

30. Effect of electrolysis parameters on the morphology and chemical composition of electrolytic Cu-Zn alloy powders

HAPÇI AĞAOĞLU G., ORHAN G.
World Powder Metallurgy Congress and Exhibition, World PM 2010, Florence, İtalya, 10 - 14 Ekim 2010, cilt.1, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier

31. Pirofosfatlı Elektrolitlerden Bakır-Çinko Alaşım Tozu Üretiminde Elektrolit Bileşimi ve Akım Yoğunluğunun Alaşım Bileşimine Etkisi

HAPÇI G., ORHAN G.
14th International Metalurgy and Materials Congress, Türkiye, 1 - 04 Kasım 2008, ss.405-412, (Tam Metin Bildiri)
Metrikler

Yayın

50

Yayın (WoS)

19

Yayın (Scopus)

20

Atıf (WoS)

492

H-İndeks (WoS)

10

Atıf (Scopus)

486

H-İndeks (Scopus)

10

Atıf (Scholar)

603

H-İndeks (Scholar)

11

Atıf (Diğer Toplam)

2

Proje

10

Tez Danışmanlığı

1
BM Sürdürülebilir Kalkınma Amaçları