Yayınlar & Eserler

Yayın Ağı
Makaleler 10
Tümü (10)
SCI-E, SSCI, AHCI (6)
SCI-E, SSCI, AHCI, ESCI (6)
Scopus (6)
TRDizin (3)
Diğer Yayınlar (1)

1. Değişken pasif eleman rijitliği içeren bir Hill tipi kas modelinin simülasyonu ve performans analizi

Ortes F., ERSİN B. A.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.25, sa.1, ss.187-195, 2025 (TRDizin) identifier

2. Katı Zerreler İçeren Bir Akışkan Hüzmesinin Plakaya Doğru Akışının Sayısal Yöntemlerle Modellenmesi

Alanbel Ersin B., Karabulut D., Örteş F.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.6, sa.23, ss.1542-1550, 2023 (TRDizin)

3. Sensitivity of muscle force response of a two-state cross-bridge model to variations in model parameters

ÖRTEŞ F., Jinha A., Herzog W., Arslan Y. Z.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE , cilt.236, sa.10, ss.1513-1520, 2022 (SCI-Expanded, Scopus) identifier identifier identifier

4. İskelet kaslarındaki kuvvet üretim mekanizmasının Huxley tipi kas modelleriyle incelenmesi

Örteş F., Arslan Y. Z.
Dokuz Eylül Üniversitesi Tıp Fakültesi Dergisi , cilt.35, sa.3, ss.415-426, 2021 (TRDizin)

5. PREDICTION OF MECHANICAL ALTERATIONS IN MULTI-LAYER SBS-MODIFIED HOT MIX ASPHALT AND SOIL-FOUNDATION STRUCTURE

Karakas A. S., ÖRTEŞ F.
BALTIC JOURNAL OF ROAD AND BRIDGE ENGINEERING , cilt.16, sa.3, ss.159-194, 2021 (SCI-Expanded, Scopus) identifier identifier

6. Experimental investigation of biodynamic human body models subjected to whole-body vibration during a vehicle ride.

Taskin Y., Hacioglu Y., Ortes F., Karabulut D., Arslan Y. Z.
International journal of occupational safety and ergonomics : JOSE , cilt.25, ss.530-544, 2019 (SSCI, Scopus) identifier identifier identifier

7. Biomechanical, histological, and radiological effects of different phosphodiesterase inhibitors on femoral fracture healing in rats

DİNÇEL Y. M., Alagoz E., Arikan Y., Caglar A. K., Dogru S. C., Ortes F., et al.
JOURNAL OF ORTHOPAEDIC SURGERY , cilt.26, sa.2, 2018 (SCI-Expanded, Scopus) Creative Commons License identifier identifier identifier

8. Comparative assessment of the mechanical properties of asphalt layers under the traffic and environmental conditions

KARAKAŞ A. S., ÖRTEŞ F.
CONSTRUCTION AND BUILDING MATERIALS , cilt.131, ss.278-290, 2017 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

9. Comparative evaluation of EMG signal features for myoelectric controlled human arm prosthetics

Karabulut D., Ortes F., Arslan Y. Z., Adli M. A.
BIOCYBERNETICS AND BIOMEDICAL ENGINEERING , cilt.37, sa.2, ss.326-335, 2017 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

10. Design and Production of Subject Specific Insole Using Reverse Engineering and 3D Printing Technology

Sürmen H. K., Örteş F., Arslan Y. Z.
International Journal of Engineering and Science Invention , cilt.5, sa.12, ss.11-15, 2016 (Hakemli Dergi) Creative Commons License
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 18

1. Complementary Use of FEA and Neural Network Modeling for Evaluating RC Beam Performance

Sevgen S., Örteş F., Sayın B.
27th International Scientific Conference MECHANIKA 2023, Kaunas, Litvanya, 26 Mayıs 2023, ss.1-3, (Tam Metin Bildiri)

2. Effect of Change in Passive Element Behaviour on the Force Response of Hill-type Muscle Model

Örteş F.
27th International Scientific Conference MECHANIKA 2023, Kaunas, Litvanya, 26 Mayıs 2023, ss.1-5, (Tam Metin Bildiri)

3. Mechanical Analysis of Reinforced Concrete Beams Strengthened with NSM FRP Technique: A Combined FEA and Artificial Neural Network Study

Örteş F., Sayın B., Sevgen S.
27th International Scientific Conference MECHANIKA 2023, Kaunas, Litvanya, 26 Mayıs 2023, ss.1-3, (Tam Metin Bildiri)

4. Evaluation of RC Beam Performance with FEA and Linear Regression: A Comparative Study of Control Beam and Side-Bonded Beam

Sayın B., Sevgen S., Örteş F.
27th International Scientific Conference MECHANIKA 2023, Kaunas, Litvanya, 26 Mayıs 2023, ss.1-3, (Tam Metin Bildiri)

5. Active and Passive Contribution to Force in Skeletal Muscle Fibres: Effect of an Active Stretch

Joumaa V., Ortes F., Herzog W.
64th Annual Meeting of the Biophysical-Society, California, Amerika Birleşik Devletleri, 15 - 19 Şubat 2020, cilt.118, (Özet Bildiri) identifier

6. New Insights into Force After Active Stretch in Damaged Skinned Muscle Fibres

Joumaa V., Nazeer S., Ortes F., Herzog W.
63rd Annual Meeting of the Biophysical-Society, Maryland, Amerika Birleşik Devletleri, 2 - 06 Mart 2019, cilt.116, (Özet Bildiri) Creative Commons License identifier

7. Computer aided design of custom-made miniplates for virtual planning in orthognathic surgery

Kara M. B., ÖRTEŞ F., CANSIZ E., ARSLAN Y. Z.
9th International Symposium on Mechanics of Materials and Structures, Augustow, Polonya, 4 - 08 Haziran 2017, ss.92-94, (Tam Metin Bildiri)

8. Estimation of In Vivo Muscle Forces Using Artificial Neural Networks and EMG Signals

ÖRTEŞ F., KARABULUT D., ARSLAN Y. Z., HERZOG W.
8. Ulusal Biyomekanik Kongresi, Ankara, Türkiye, 31 Mart - 03 Nisan 2017, ss.17, (Tam Metin Bildiri)

9. Estimation of In Vivo Muscle Forces Using Artificial Neural Networks and EMG Signals

ÖRTEŞ F., KARABULUT D., ARSLAN Y. Z., HERZOG W.
8. Ulusal Biyomekanik Kongresi, Ankara, Türkiye, 19 - 23 Ekim 2016, ss.1, (Özet Bildiri)

10. An Assessment of SBS Modified Asphalt Concrete Pavements Performance Features Performing Numerical Analysis

KARAKAŞ A. S., Bozkurt T. S., SAYIN B., ÖRTEŞ F.
14th International Conference of Numerical Analysis and Applied Mathematics, Rodos, Yunanistan, 19 - 25 Eylül 2016, ss.1-4, (Tam Metin Bildiri)

11. Retrofitting techniques using CFRP of masonry brick vaults

SAYIN B., DAMCI E., BOZKURT T. S., ÖRTEŞ F.
Mechcomp: 2nd International Conference on Mechanics of Composite Materials, Porto, Portekiz, 11 - 14 Temmuz 2016, ss.71, (Özet Bildiri)

12. A numerical comparison of strengthening techniques applied to masonry infilled walls

BOZKURT T. S., ÖRTEŞ F., DAMCI E., SAYIN B.
Mechcomp: 2nd International Conference on Mechanics of Composite Materials, Porto, Portekiz, 11 - 14 Temmuz 2016, ss.70, (Özet Bildiri)

13. A numerical approach for strengthening of masonry dome walls

ÖRTEŞ F., SAYIN B., BOZKURT T. S., DAMCI E.
Mechcomp: 2nd International Conference on Mechanics of Composite Materials, Porto, Portekiz, 11 - 14 Temmuz 2016, ss.70-71, (Özet Bildiri)

14. A biomechatronic application on prosthetics for undergraduate engineering students

ORTES F., SURMEN H. K., ARSLAN Y. Z.
International Conference on Education in Mathematics, Science& Technology (ICEMST), Muğla, Türkiye, 19 - 22 Mayıs 2016, ss.1-4, (Tam Metin Bildiri)

15. An educational application of 3D printing technique used for insole production

SURMEN H. K., ORTES F., ARSLAN Y. Z.
International Conference on Education in Mathematics, Science& Technology (ICEMST), Muğla, Türkiye, 19 - 22 Mayıs 2016, ss.1-5, (Tam Metin Bildiri)

16. Numerical Simulation of Structural Behavior of NSM CFRP Strengthened RC Beams Using Finite Element Analysis

ÖRTEŞ F., SAYIN B., Bozkurt T. S., AKÇAY C.
FRPRCS-12 / APFIS 2015: The 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures & The 5th Asia-Pasific Conference on Fiber Reinforced Polymers in Structures, Joint Conference, Nanjing, Çin, 14 - 16 Aralık 2015, ss.1-6, (Tam Metin Bildiri)

17. Extraction and Classification of EMG signal features for the human arm prosthetics

ÖRTEŞ F., Karabulut D., ARSLAN Y. Z.
BİYOMUT, İstanbul, Türkiye, 6 - 07 Kasım 2015, ss.1-4, (Tam Metin Bildiri)

18. İnsan Kolu Protezleri için EMG Sinyallerinin Özniteliklerinin Elde Edilmesi ve Sınıflandırılması

ÖRTEŞ F., Karabulut D., ARSLAN Y. Z.
BİYOMUT, İstanbul, Türkiye, 5 - 06 Kasım 2015, ss.1-4, (Tam Metin Bildiri)
Kitaplar 5

1. Fundamentals of 3D Printing and Its Applications in Biomedical Engineering

Sürmen H. K., Örteş F., Arslan Y. Z.
3D Printing in Biomedical Engineering, Sunpreet Singh,Chander Prakash,Rupinder Singh, Editör, Springer, London/Berlin , Singapore, ss.23-41, 2020

2. Exoskeletons, exomusculatures, space suits

Arslan Y. Z., Karabulut D., Örteş F.
Biomechatronics, Marko Popovic, Editör, Academic Press , London, ss.305-331, 2019

3. Computer-Aided Design of Subject-Specific Dental Instruments for Preoperative Virtual Planning in Orthognathic Surgery

ÖRTEŞ F., CANSIZ E., ARSLAN Y. Z.
Biomanufacturing, Prakash, C., Singh, S., Singh, R., Ramakrishna, S., Pabla, B.S., Puri, S., Uddin, M.S., Editör, Springer (2019 Springer Nature Switzerland AG), ss.89-102, 2019

4. General Perspectives on Electromyography Signal Features and Classifiers Used for Control of Human Arm Prosthetics

ÖRTEŞ F., KARABULUT D., ARSLAN Y. Z.
Encyclopedia of Information Science and Technology, Fourth Edition, , Editör, IGI Global, ss.492-504, 2018

5. Biyomekanik Uygulamalar İçin Temel Mekanik

ARSLAN Y. Z., ÖRTEŞ F.
Temel Kinezyo-Mekanik Klinik Örnekli Anlatım, N. Ekin Akalan, Yener Temelli, Editör, İstanbul Tıp Kitap Yayınevi, İstanbul, ss.1-81, 2016
Metrikler

Yayın

33

Yayın (WoS)

8

Yayın (Scopus)

6

Atıf (WoS)

50

H-İndeks (WoS)

4

Atıf (Scopus)

72

H-İndeks (Scopus)

5

Proje

5

Fikri Mülkiyet

6

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları